White-Westinghouse Washing Machine Error E12
⚡ Quick Answer: The White Westinghouse Washing Machine E12 error indicates a drainage failure, causing the cycle to pause and the door to remain locked. This often re... ✅ DIY Fixable
What Does Error E12 Mean?
The White Westinghouse Washing Machine E12 error indicates a drainage failure, causing the cycle to pause and the door to remain locked. This often results from an abnormal water load detected during the drying cycle, possibly due to an incorrectly positioned drain hose or a fault in the pressure switch or inlet valve.
Common Symptoms:
- Cycle pauses with E12 displayed
- Drying/water removal stage halted
- Door remains locked during error
Possible Causes
- Abnormal water load detected during drying cycle (medium)
- Incorrect drain hose position or low water flow (low)
- Pressure switch or inlet valve fault (low)
How to Fix Error E12
DIY Fix Basic checks for E12 on White Westinghouse washer
- Stop the machine and disconnect power.
- Check that the drain hose is correctly positioned (not too high/kinked).
- Ensure water supply faucets are open and providing normal flow.
- Try restarting the cycle after these checks.
Technician Only Technical diagnosis for E12 error
- Check the pressure switch and associated tubing for leaks or incorrect installation.
- Inspect inlet water valve for proper operation.
- Verify drain pump function and clean any filter screens.
- Test control board inputs/outputs related to water level and drying cycle.
- Replace faulty parts as identified.
Parts needed: Pressure switch, Inlet water valve, Drain pump, Control board
- If error persists after basic checks
- If water appears to leak or components make unusual noises
Next step
Choose the next step for E12
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | WH49X30114 |
| voltage_rating | 120V AC |
Common Questions
What does E12 error mean on White Westinghouse Washing Machine?
The E12 error indicates a drainage failure, pausing the cycle and locking the door.
Can I fix White Westinghouse Washing Machine E12 error myself?
Yes, you can check the drain hose positioning and ensure water supply faucets are open.
How much does it cost to fix E12 error?
Repair costs range from $80 to $300+, depending on parts and labor.
When should I call a technician for E12?
Call a technician if the error persists after basic checks or if you notice leaks or unusual noises.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!