White-Westinghouse Washing Machine Error E11
⚡ Quick Answer: The E11 error on your White Westinghouse Washing Machine indicates a problem with the water inlet valve or water level sensing. This typically results... ✅ DIY Fixable
What Does Error E11 Mean?
The E11 error on your White Westinghouse Washing Machine indicates a problem with the water inlet valve or water level sensing. This typically results in the machine failing to fill with water correctly. Symptoms include the machine stopping mid-cycle and sensors detecting incorrect water levels. Common causes include a faulty water level sensor or pressure switch, or issues with the water inlet components.
Common Symptoms:
- Machine stops mid‑cycle with E11 displayed
- Water not filling correctly or detected as incorrect by sensors (community consensus on generic washers)
Possible Causes
- Possible water level sensing/fill detection fault (medium)
How to Fix Error E11
DIY Fix Basic water supply and reset checks
- Turn off and unplug the machine for a few minutes, then reconnect power — this may clear temporary errors.
- Ensure water taps connected to the washer are fully open.
- Check that inlet hoses are not kinked, clogged, or blocked.
- Inspect inlet hose filters/screens for debris and clean if necessary.
- Verify that the washer is receiving water (feel for flow in hoses).
Technician Only Inspect and test water level sensor/pressure switch and inlet components
- Disconnect the washer from power and water supplies.
- Access and inspect the water level sensor or pressure switch for correct operation and leaks in the pressure tube (if present).
- Test the sensor with appropriate tools (multimeter) to confirm correct electrical readings.
- Verify inlet valve operation and replace if faulty.
Parts needed: water level sensor / pressure switch, inlet valve, pressure hose/tubing
- If basic water supply checks do not clear the error
- If there is evidence of internal leaking, failed sensor tests, or inability to fill properly
Next step
Choose the next step for E11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E11 error mean on White Westinghouse Washing Machine?
E11 indicates a water inlet valve problem or water level sensing issue, causing the machine to stop filling.
Can I fix White Westinghouse Washing Machine E11 error myself?
Yes, check water supply, ensure hoses are clear, and try resetting the machine.
How much does it cost to fix E11 error?
Repair costs range from $50 to $200 for parts, plus additional labor charges.
When should I call a technician for E11?
Call a technician if basic checks don't resolve the issue or if there are signs of internal leaks.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!