White Westinghouse Dryer Error E97
⚡ Quick Answer: The E97 error code on your White-Westinghouse dryer typically signals a malfunction in the heating element, which may lead to no heat during the dryin... ✅ DIY Fixable
What Does Error E97 Mean?
The E97 error code on your White-Westinghouse dryer typically signals a malfunction in the heating element, which may lead to no heat during the drying cycle. This can prevent your clothes from drying properly. To address this issue, begin by checking the lint filter and venting system for clogs, as these can cause airflow problems unrelated to the heating element. If the error persists after a power reset and basic checks, further inspection of the control components may be necessary.
Possible Causes
- Heating Element
How to Fix Error E97
DIY Fix Check for basic issues and consult manual
- Refer to your specific model’s owner manual or printed error code section (if available) for E97 specifics — many manuals for White‑Westinghouse dryers can be found on manuals sites, but error code definitions are often omitted in generic guides
- Power off and unplug the dryer, wait 5–10 minutes, and plug back in to see if the display clears
- Ensure the lint filter and venting system are clean to avoid unrelated airflow or heat build‑up issues
Technician Only Request official service documentation and inspect control components
- Obtain the exact service manual for the dryer’s model number, which may contain proprietary code definitions
- Inspect control board and wiring harnesses for damage or loose connections
- Test UI/display board continuity and functionality if error persists
Parts needed: control board, user interface/display board, connectors and harnesses
- Error persists after power cycling and basic checks
- Dryer fails to operate normally beyond just displaying the code
Next step
Choose the next step for E97
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | 5300622031 |
| voltage_rating | 240V AC |
Common Questions
What does E97 error mean on White-Westinghouse dryer?
E97 indicates a heating element malfunction, leading to no heat during drying.
Can I fix White-Westinghouse dryer E97 error myself?
Yes, start by checking the lint filter and venting, and perform a power reset.
How much does it cost to fix E97 error?
Repair costs range from $100 to $400+, depending on parts and labor.
When should I call a technician for E97?
Call a technician if the error persists after basic troubleshooting or if the dryer isn't operating normally.
Sources & References
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!