White-Westinghouse Dryer Error E5A
⚡ Quick Answer: The E5A error code on White Westinghouse dryers typically indicates a malfunction related to the heating element or motor overload. If your dryer stop... ✅ DIY Fixable
What Does Error E5A Mean?
The E5A error code on White Westinghouse dryers typically indicates a malfunction related to the heating element or motor overload. If your dryer stops and displays this error, it may be due to excessive load conditions, preventing the drying cycle from progressing. Reducing the laundry load often resolves the issue, but if the error persists, further inspection is necessary to address potential motor or wiring problems.
Common Symptoms:
- Dryer stops and displays E5A
- Cycle does not progress (reported for Electrolux E5A)
- Occurs under heavy load conditions (Electrolux interpretation)
Possible Causes
- Possible motor overload due to excessive laundry load (low)
How to Fix Error E5A
DIY Fix Reduce load size and restart
- Stop the dryer and remove some laundry to reduce the weight.
- Ensure load size is within the recommended capacity for your specific model.
- Restart the drying cycle to see if error clears.
Technician Only Inspect motor and overload circuits
- Access internal dryer components per service manual.
- Check motor windings and motor load conditions.
- Inspect wiring between motor and control board for damage or loose connections.
- Test motor and overload protection devices under diagnostic loads.
Parts needed: Dryer motor, Overload protection / thermal cutoff, Related wiring harness
- If reducing load size and basic reset do not clear E5A
- If unusual noises, burning smells, or excessive vibration occur
- If internal inspection reveals damaged wiring or motor overheating
Next step
Choose the next step for E5A
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5400W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | 5300622031 |
| voltage_rating | 240V AC |
Common Questions
What does E5A error mean on White Westinghouse dryer?
E5A indicates a possible heating element issue or motor overload, preventing the dryer from operating.
Can I fix White Westinghouse dryer E5A error myself?
Yes, try reducing the load size and restarting the dryer to clear the error.
How much does it cost to fix E5A error?
Repair costs for the E5A error range from ¥10,000 to ¥40,000, including parts and labor.
When should I call a technician for E5A?
Contact a technician if reducing the load doesn't resolve the error or if you notice unusual noises or smells.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!