White Westinghouse Dryer Error E35

⚡ Quick Answer: The E35 error code on a White-Westinghouse dryer typically indicates a malfunction in the heating element, which may result in the dryer not producing... ✅ DIY Fixable

What Does Error E35 Mean?

The E35 error code on a White-Westinghouse dryer typically indicates a malfunction in the heating element, which may result in the dryer not producing heat during the drying cycle. If this error occurs, it is advisable to perform a simple power reset by unplugging the dryer for a few minutes, then restarting it to check if the error persists.

Possible Causes

  • Heating Element

How to Fix Error E35

DIY Fix Check basic power and display behavior

  1. Turn the dryer off and unplug it.
  2. Wait 1–2 minutes, then plug it back in and restart.
  3. Observe if the E35 error returns immediately or only under specific conditions (start-up, drying cycle, etc.).

Technician Only Consult service manual or contact support

  1. Obtain the correct service manual for the exact White-Westinghouse dryer model (error code tables often differ by model).
  2. Review the diagnostics section for E35 or related fault signaling.
  3. Check display/control board wiring and connectors for faults or shorts.

Parts needed: Service manual specific to the dryer model, Basic test tools (multimeter)

🛑 When to Call a Pro:
  • If the error persists after a simple power reset and you cannot find documentation for code E35 in your model’s manual.

Technical Specifications

wattage 5400W
component Heating Element
resistance 10-30 ohms
part_number 5300622031
voltage_rating 240V AC

Common Questions

What does E35 error mean on white westinghouse dryer?

E35 indicates a heating element malfunction, leading to no heat during drying.

Can I fix white westinghouse dryer E35 error myself?

Yes, try resetting the dryer by unplugging it for a few minutes.

How much does it cost to fix E35 error?

Repair costs vary by service provider; check with local technicians.

When should I call a technician for E35?

Call a technician if the error persists after a power reset.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!