Whirlpool Refrigerator Error PO

⚡ Quick Answer: The Whirlpool Refrigerator error code PO signifies a power outage or power-on delay alert. This indicates that the refrigerator has detected a recent ... ✅ DIY Fixable

What Does Error PO Mean?

The Whirlpool Refrigerator error code PO signifies a power outage or power-on delay alert. This indicates that the refrigerator has detected a recent loss of electrical power or an interruption in service. As a result, the unit may not cool properly and could produce unusual clicking sounds. The error code typically appears on the fridge control panel after a power interruption or when the appliance is first powered on. Users should acknowledge the code to clear the alert and ensure the refrigerator is securely plugged in.

Common Symptoms:

  • Error code PO displayed on fridge control panel
  • May appear after power interruption or when first powering on refrigerator
  • Display may flash until acknowledged or cleared

Possible Causes

  • Recent power outage or interruption (medium)

How to Fix Error PO

DIY Fix Acknowledge/Clear the PO Code and Check Food Safety

  1. Check that the refrigerator is properly plugged in and power is steady.
  2. Verify internal temperatures — check food for signs of thawing or spoilage.
  3. Press the appropriate button to acknowledge/clear the PO error code.
  4. Allow the refrigerator to run for several hours to ensure temperatures return to normal.

Technician Only Verify Power and Electrical Integrity

  1. Check power supply, outlet, and circuit breaker for stability and proper voltage.
  2. Inspect fridge’s power cord and any surge protector being used.
  3. Confirm that control board and sensors are functioning normally after clearing the PO code.
  4. Test internal components if temperatures do not stabilize.

Parts needed: Multimeter (for electrical verification), Control board (if persistent issues)

🛑 When to Call a Pro:
  • PO code cannot be cleared or refrigerator fails to cool normally after power restoration
  • Repeated power interruptions without stable operation
  • Unusual noises or other concurrent error codes appear

Technical Specifications

wattage 200W
component Compressor Overload Relay
resistance 5-10 ohms
part_number W10662129
voltage_rating 120V AC

Common Questions

What does PO error mean on Whirlpool Refrigerator?

The PO error indicates a power outage or power-on delay, often displayed after a recent power interruption.

Can I fix Whirlpool Refrigerator PO error myself?

Yes, you can acknowledge the PO code, check the power connection, and verify internal temperatures.

How much does it cost to fix PO error?

The repair cost varies by model and region, often depending on whether parts need to be replaced.

When should I call a technician for PO?

Call a technician if the PO code cannot be cleared or if the refrigerator fails to cool normally after power restoration.

Sources & References

Data last verified: 2026-01-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!