Whirlpool Refrigerator Error 6

⚡ Quick Answer: 6 means Whirlpool Refrigerator error 6 indicates a malfunctioning temperature sensor, often resulting in inconsistent cooling an... This is typically a DIY fix.

What Does Error 6 Mean?

Whirlpool Refrigerator error 6 indicates a malfunctioning temperature sensor, often resulting in inconsistent cooling and unusual display behavior.

Common Causes

  • Temperature Sensor (60% likelihood)

Troubleshooting Steps

  1. Step 1: Check the temperature sensor's resistance

    Using a multimeter, measure the resistance of the temperature sensor. It should typically read between 5k to 10k ohms at room temperature. If the reading is outside this range, the sensor is likely faulty.

    Ensure the multimeter is set to the correct resistance setting.

  2. Step 2: Access the temperature sensor

    Remove the back panel of the refrigerator to locate the temperature sensor. It is usually found near the evaporator coils.

    Keep screws organized to avoid losing them.

  3. Step 3: Disconnect the faulty sensor

    Carefully unplug the temperature sensor from its connector. Make sure to note the orientation for reinstallation.

    Take a photo if needed for reference.

  4. Step 4: Install the new temperature sensor

    Connect the new temperature sensor to the harness, ensuring it is securely attached. Reinstall the back panel of the refrigerator.

    Double-check connections to prevent future issues.

  5. Step 5: Test the refrigerator

    Plug the refrigerator back in and monitor the temperature display for stability. Ensure the cooling function operates correctly.

    Allow a few hours for the temperature to stabilize.

How to Reset

Error 6 cannot be reset until the faulty temperature sensor is replaced. Once replaced, the error should clear automatically.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kΩ
part_number W10822564
voltage_rating N/A

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow safety precautions.

How much does a new temperature sensor cost?

A replacement temperature sensor typically costs between $20 to $50.

What causes error 6 in my Whirlpool refrigerator?

Error 6 is usually caused by a malfunctioning temperature sensor that affects cooling performance.

Should I call a professional for error 6?

If you're uncomfortable with electrical components or the issue persists after replacement, it's best to call a technician.

When should I expect my refrigerator to cool properly after fixing error 6?

You should see improvements in cooling within a few hours after replacing the sensor.

User Comments (0)

Share your experience or solution below.

Be the first to comment!