Whirlpool Refrigerator Error 8

⚡ Quick Answer: The Whirlpool Refrigerator error code 8 indicates an environmental temperature sensor fault detected by the refrigerator’s self-diagnostics. This ca... ✅ DIY Fixable

What Does Error 8 Mean?

The Whirlpool Refrigerator error code 8 indicates an environmental temperature sensor fault detected by the refrigerator’s self-diagnostics. This can lead to temperature control issues, affecting the cooling performance and potentially causing the appliance to produce a clicking sound. If the error persists, further diagnosis and repair of the temperature sensor may be necessary.

Common Symptoms:

  • Refrigerator display shows “8” or E8 code
  • Temperature control or stability issues may be present
  • Cooling performance may be affected

Possible Causes

  • Environmental temperature sensor fault (medium)

How to Fix Error 8

DIY Fix Basic checks & simple reset

  1. Note the error is displayed and observe if cooling is affected
  2. Power cycle the refrigerator: unplug for >60 seconds, then plug back in to clear temporary faults
  3. Ensure doors are fully closed and seals are tight
  4. Check ambient room temperature and relocate fridge if in extreme heat/cold

Technician Only Diagnose & repair environmental temperature sensor

  1. Use model‑specific service manual to locate the environmental temperature sensor
  2. Test sensor and wiring with appropriate tools (e.g., multimeter)
  3. Replace faulty environmental temperature sensor or repair wiring as needed
  4. After replacement, verify correct operation and clear stored fault codes

Parts needed: Environmental temperature sensor, Wiring harness if damaged

🛑 When to Call a Pro:
  • If error persists after power cycle and user‑level checks
  • If refrigerator cooling is significantly impaired
  • If internal diagnostics cannot be accessed or interpreted

Technical Specifications

wattage N/A
component Compressor Relay
resistance 0-10 ohms
part_number W10662129
voltage_rating 120V AC

Common Questions

What does 8 error mean on Whirlpool Refrigerator?

Error 8 indicates an environmental temperature sensor fault, leading to cooling and temperature control issues.

Can I fix Whirlpool Refrigerator 8 error myself?

Yes, you can perform basic checks and a power cycle to see if the error resolves itself.

How much does it cost to fix 8 error?

The estimated cost to fix error 8 ranges from $50 to $150, depending on parts and labor.

When should I call a technician for 8?

Call a technician if the error persists after user-level checks or if cooling performance is significantly impaired.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!