Whirlpool Refrigerator Error 2

⚡ Quick Answer: 2 means Whirlpool Refrigerator error 2 indicates a malfunction in the temperature sensor, which may cause erratic temperature re... This is typically a DIY fix.

What Does Error 2 Mean?

Whirlpool Refrigerator error 2 indicates a malfunction in the temperature sensor, which may cause erratic temperature readings and inconsistent cooling performance.

Common Causes

  • Temperature Sensor (50% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Temperature Sensor Connections

    Open the refrigerator and locate the temperature sensor, usually found near the evaporator coil. Check for loose or corroded connections. Tighten or clean as necessary.

    Ensure connections are secure to prevent future issues.

  2. Step 2: Test the Temperature Sensor

    Using a multimeter, set it to the resistance setting. Disconnect the sensor and measure its resistance. Compare the reading with the manufacturer's specifications to determine if it's faulty.

    A reading outside the specified range indicates a bad sensor.

  3. Step 3: Replace the Temperature Sensor if Necessary

    If the sensor is faulty, remove it by unscrewing it from its mount. Install the new sensor by reversing the removal process and reconnecting the wiring.

    Ensure the new sensor is compatible with your refrigerator model.

How to Reset

Error 2 cannot be reset until the temperature sensor is replaced or repaired. Once fixed, the error will clear automatically.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-15 kOhms at room temperature
part_number W10820043
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow the instructions carefully.

How long does it take to fix error 2?

The repair typically takes about 45-60 minutes depending on your skill level.

What causes the temperature sensor to fail?

Temperature sensors can fail due to wear and tear, electrical issues, or exposure to moisture.

Should I call a professional for error 2?

If you're uncomfortable with electrical components or troubleshooting, it's best to call a technician.

When should I consider replacing my refrigerator?

If error 2 persists after replacing the sensor, it may indicate a deeper issue with the control board.

User Comments (0)

Share your experience or solution below.

Be the first to comment!