Whirlpool Refrigerator Error PC

⚡ Quick Answer: PC means Whirlpool Refrigerator error PC indicates a failure in the temperature sensor, often resulting in inconsistent cooling a... This is typically a DIY fix.

What Does Error PC Mean?

Whirlpool Refrigerator error PC indicates a failure in the temperature sensor, often resulting in inconsistent cooling and fluctuating temperatures.

Common Causes

  • Temperature Sensor (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Temperature Sensor

    Locate the temperature sensor inside the refrigerator compartment. Check for any visible damage or loose connections.

    Make sure to take a photo of the wiring before disconnecting.

  2. Step 2: Test the Sensor with a Multimeter

    Disconnect the sensor and set your multimeter to the resistance setting. Measure the resistance across the sensor terminals. Compare the reading to the manufacturer's specifications.

    A reading outside the expected range indicates a faulty sensor.

  3. Step 3: Replace the Temperature Sensor

    If the sensor is faulty, remove it from its mounting and install the new sensor. Reconnect the wiring as per your earlier photo.

    Ensure all connections are secure to avoid future issues.

  4. Step 4: Test the Refrigerator

    Plug the refrigerator back in and monitor the temperature for a few hours to ensure it is cooling properly.

    Check for any error codes after a few hours.

How to Reset

This error cannot be reset until the faulty temperature sensor is replaced.

Technical Specifications

wattage
component Temperature Sensor
resistance 5-10 kOhms at 25°C
part_number W10822633
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow safety precautions.

How much does a temperature sensor cost?

Typically, a replacement sensor costs between $20 and $50 depending on the model.

What causes the temperature sensor to fail?

Common causes include electrical surges, wear over time, or physical damage.

Should I call a technician if the error persists?

Yes, if the error continues after replacing the sensor, a technician can diagnose deeper issues.

When should I expect my refrigerator to cool again after fixing the error?

You should see improvement within a few hours after replacing the sensor.

User Comments (0)

Share your experience or solution below.

Be the first to comment!