Whirlpool Refrigerator Error OP

⚡ Quick Answer: OP means Whirlpool Refrigerator error OP indicates an over temperature condition, often accompanied by a continuous alarm sound a... This is typically a DIY fix.

What Does Error OP Mean?

Whirlpool Refrigerator error OP indicates an over temperature condition, often accompanied by a continuous alarm sound and a flashing temperature display.

Common Causes

  • Temperature Sensor Failure (50% likelihood)
  • Faulty Control Board (30% likelihood)
  • Blocked Air Vents (20% likelihood)

Troubleshooting Steps

  1. Step 1: Check the Temperature Sensor

    Locate the temperature sensor inside the refrigerator. Use a multimeter to test its resistance. It should read between 5k to 10k ohms at room temperature. If the reading is outside this range, replace the sensor.

    Ensure the sensor is properly connected.

  2. Step 2: Inspect the Control Board

    Access the control board by removing the back panel. Look for any burnt components or loose connections. If any issues are found, the control board may need to be replaced.

    Document the wiring for easy reconnection.

  3. Step 3: Clear Air Vents

    Check for any obstructions around the air vents inside the refrigerator. Remove any items blocking airflow to ensure proper cooling.

    Regularly check vents to prevent future issues.

How to Reset

To reset the OP error, unplug the refrigerator for 5 minutes and then plug it back in. This may clear temporary faults but does not fix the underlying issue.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5k-10k ohms
part_number W10316822
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the OP error myself?

Yes, if you have basic tools and skills, you can troubleshoot the temperature sensor and air vents.

How long will it take to resolve the OP error?

Resolving the OP error typically takes about 30-45 minutes depending on the issue.

What causes the OP error in Whirlpool refrigerators?

The OP error is commonly caused by a faulty temperature sensor, control board issues, or blocked air vents.

Should I call a professional for the OP error?

If you are uncomfortable with electrical components or the issue persists after your attempts, it's best to call a professional.

When should I expect the OP error to clear?

The error will clear once the underlying issue is resolved, such as replacing the faulty sensor or ensuring proper airflow.

User Comments (0)

Share your experience or solution below.

Be the first to comment!