Whirlpool Refrigerator Error H

⚡ Quick Answer: H means Whirlpool Refrigerator error H indicates a compressor overheating issue, often accompanied by unusual humming sounds and... This is typically a DIY fix.

What Does Error H Mean?

Whirlpool Refrigerator error H indicates a compressor overheating issue, often accompanied by unusual humming sounds and a warm exterior.

Common Causes

  • Compressor (50% likelihood)
  • Condenser coils (30% likelihood)
  • Thermostat (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the compressor for overheating

    Feel the compressor; if it's excessively hot, it may need replacement or further diagnosis.

    Ensure the refrigerator has been running for a while before checking.

  2. Step 2: Clean the condenser coils

    Use a soft brush to remove dust and debris from the condenser coils located at the back or bottom of the refrigerator.

    This should be done regularly to maintain efficiency.

  3. Step 3: Test the thermostat

    Use a multimeter to check the thermostat's continuity; replace it if it shows no continuity.

    A faulty thermostat can prevent proper cooling.

  4. Step 4: Check for proper airflow

    Ensure that there is adequate space around the refrigerator for airflow; remove any obstructions.

    Good airflow is crucial for cooling efficiency.

  5. Step 5: Monitor the refrigerator's performance

    After performing the above steps, observe the refrigerator for a few hours to see if the error reoccurs.

    If the error persists, professional help may be needed.

How to Reset

This error cannot be reset until the underlying issue is resolved; monitor the refrigerator after repairs.

Technical Specifications

wattage 200W
component Compressor
resistance 3-5 ohms
part_number W10309969
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the H error myself?

Yes, if you have basic tools and some experience with appliance repair, you can troubleshoot and fix the issue.

How long does it take to resolve the H error?

Resolving the H error can take 1-2 hours depending on the cause and your experience.

What causes the compressor to overheat?

Overheating can be caused by dirty condenser coils, a malfunctioning thermostat, or an aging compressor.

Should I call a professional for error H?

If you're uncomfortable with electrical components or if the issue persists after your attempts, it's best to call a professional.

When should I check the compressor for overheating?

You should check the compressor if you hear unusual humming sounds or notice the refrigerator is not cooling properly.

User Comments (0)

Share your experience or solution below.

Be the first to comment!