Whirlpool Refrigerator Error Co

⚡ Quick Answer: Co means Whirlpool Refrigerator error Co indicates a compressor overload protection issue, often accompanied by unusual clicking ... This is typically a DIY fix.

What Does Error Co Mean?

Whirlpool Refrigerator error Co indicates a compressor overload protection issue, often accompanied by unusual clicking sounds and the display not functioning properly.

Common Causes

  • Compressor (60% likelihood)
  • Start Relay (30% likelihood)
  • Thermostat (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Condenser Fan

    Check if the condenser fan is running. If not, the fan motor may need replacement.

    Ensure the fan blades are free of debris.

  2. Step 2: Test the Compressor

    Use a multimeter to check the compressor's resistance. If it’s outside the expected range, it may need replacement.

    Refer to the technical specs for resistance values.

  3. Step 3: Examine the Start Relay

    Remove the start relay and test it for continuity. Replace if it shows no continuity.

    A faulty relay can prevent the compressor from starting.

  4. Step 4: Check Airflow Around the Unit

    Ensure there is adequate airflow around the refrigerator. Clean any dust or debris from the coils.

    Blocked airflow can cause overheating.

  5. Step 5: Evaluate the Thermostat Settings

    Verify that the thermostat is set to the correct temperature and functioning properly.

    An incorrect setting can lead to compressor issues.

How to Reset

To reset the Co error, unplug the refrigerator for 5 minutes and then plug it back in. This may help clear the error if the issue is temporary.

Technical Specifications

wattage 200W
component Compressor
resistance 3-5 ohms
part_number W10309966
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the Co error myself?

Yes, if you have basic tools and some technical knowledge, you can troubleshoot the issue.

How long does it take to resolve the Co error?

Typically, it takes about 1-2 hours depending on the specific issue.

What causes the Co error in my refrigerator?

The Co error is often caused by compressor overload due to overheating or a faulty start relay.

Should I call a professional for the Co error?

If you are uncomfortable with electrical components or the issue persists after troubleshooting, it’s best to call a pro.

When should I expect the Co error to clear?

The error will not clear until the underlying issue is resolved, such as fixing the compressor or start relay.

User Comments (0)

Share your experience or solution below.

Be the first to comment!