Whirlpool Refrigerator Error CFR

⚡ Quick Answer: CFR means Whirlpool Refrigerator error CFR indicates a compressor failure, often accompanied by unusual humming sounds and the ref... This is typically a DIY fix.

What Does Error CFR Mean?

Whirlpool Refrigerator error CFR indicates a compressor failure, often accompanied by unusual humming sounds and the refrigerator not cooling properly.

Common Causes

  • Compressor (50% likelihood)
  • Start relay (30% likelihood)
  • Capacitor (20% likelihood)

Troubleshooting Steps

  1. Step 1: Check the compressor for signs of overheating

    Inspect the compressor for any burnt smell or discoloration, which indicates overheating.

    If the compressor is hot, allow it to cool down before further inspection.

  2. Step 2: Test the start relay

    Disconnect the start relay from the compressor and test it with a multimeter for continuity. Replace if faulty.

    Ensure the relay is properly seated when reassembling.

  3. Step 3: Inspect the capacitor

    Check the capacitor for any bulging or leakage. Use a multimeter to test its capacitance and replace if it’s out of spec.

    Discharge the capacitor before handling to avoid shock.

  4. Step 4: Test the compressor

    If the relay and capacitor are functioning, test the compressor with a multimeter for continuity. If there’s no continuity, the compressor needs replacement.

    Consider professional help if compressor replacement is needed.

How to Reset

To reset the CFR error, unplug the refrigerator for 5 minutes, then plug it back in. If the error persists, further diagnosis is required.

Technical Specifications

wattage 200W
component Compressor
resistance 3-5 ohms
part_number W10309969
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the CFR error myself?

Yes, but it requires some technical skills and tools to diagnose and replace parts.

How much does it cost to repair a CFR error?

Repair costs can range from $100 to $500 depending on whether you need to replace the compressor or other components.

What causes the CFR error in my Whirlpool refrigerator?

The CFR error is typically caused by a malfunctioning compressor, start relay, or capacitor.

Should I attempt to repair the compressor myself?

If you're not experienced with appliance repair, it's best to call a professional to avoid further damage.

When should I consider replacing my refrigerator instead of repairing it?

If the repair costs exceed 50% of the refrigerator's value or if it's over 10 years old, replacement may be more economical.

User Comments (0)

Share your experience or solution below.

Be the first to comment!