TECO Washing Machine Error LE
⚡ Quick Answer: The TECO Washing Machine error code LE signifies a motor lock issue, often resulting in the machine stopping its operation. This error can be associat... ✅ DIY Fixable
What Does Error LE Mean?
The TECO Washing Machine error code LE signifies a motor lock issue, often resulting in the machine stopping its operation. This error can be associated with drainage problems, such as blockages or abnormal drainage, as well as motor or drive system faults. Common symptoms include the LE code displayed on the control panel and the inability to drain water effectively. Addressing this issue may require checking the drainage system and inspecting the motor components.
Common Symptoms:
- LE appears on the control panel and the washer stops operation.
- Possible inability to drain water normally.
Possible Causes
- Drainage blockage or abnormal drainage (medium)
- Motor overload or mechanical resistance (medium)
- Motor or drive fault (including motor failure or sensor malfunction) (medium)
How to Fix Error LE
DIY Fix Check and clear drainage system
- Turn off and unplug the washing machine.
- Inspect the drain hose for bends, kinks, or clogs, and straighten or clear any blockages.
- Check and clean the drain filter if accessible.
DIY Fix Reduce load and retry operation
- Open the washer and remove some clothing to reduce the load.
- Restart the machine with a smaller load to see if the error clears.
Technician Only Inspect and service motor or sensors
- Perform diagnostic checks on motor windings and drive mechanisms.
- Test motor sensors and controller signals for proper functioning.
- Replace defective motor components or sensors as necessary.
Parts needed: Motor assembly, Motor sensor or tachometer, Associated wiring/connectors
- If after basic drainage and load checks the error persists.
- If unusual noises, smell of burning, or signs of electrical failure accompany the LE error.
Next step
Choose the next step for LE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does LE error mean on TECO Washing Machine?
LE error indicates a motor lock issue, often linked to drainage problems or faults in the motor system.
Can I fix TECO Washing Machine LE error myself?
Yes, you can try checking and clearing the drainage system or reducing the load in the washer.
How much does it cost to fix LE error?
Repair costs vary by region and specific issues but are typically moderate for parts and labor.
When should I call a technician for LE?
Call a technician if the error persists after basic checks or if you notice unusual noises or smells.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!