TECO Washing Machine Error E3
⚡ Quick Answer: The TECO Washing Machine E3 error code indicates a malfunction in the door lock mechanism, which can prevent the machine from starting a wash cycle. T... ✅ DIY Fixable
What Does Error E3 Mean?
The TECO Washing Machine E3 error code indicates a malfunction in the door lock mechanism, which can prevent the machine from starting a wash cycle. This error typically arises when the lid or door is not fully closed or latched, potentially halting the cycle mid-operation. Additionally, it may be related to drainage issues if the machine fails to drain water properly. Ensure the door is securely closed and check for any blockages in the drainage system to resolve this issue.
Common Symptoms:
- Machine stops mid‑cycle and displays E3
- May occur when lid/door not firmly closed
- Possible drainage interruption
Possible Causes
- Lid/door detected as open during operation (medium)
- Drainage issue (per alternate service listing) (low)
How to Fix Error E3
DIY Fix Basic checks for E3 error
- Ensure the lid/door is fully closed and latched properly.
- Check that clothes are evenly distributed inside the drum to avoid imbalance.
- Inspect external drain hose to confirm it isn’t kinked or blocked.
- Restart the wash cycle after confirming lid closure.
Technician Only Technical troubleshooting for E3 conditions
- Verify the lid/door safety switch and its wiring for proper connection and continuity.
- Check drain hose routing and pump for blockages if drainage fault suspected.
- Use service diagnostic mode (if available) to confirm lid switch vs drain error.
- Replace faulty lid/door switch or drain components only if confirmed by testing.
Parts needed: Lid/door interlock switch, Drain pump and hose
- If lid switch and wiring check do not clear error or if water remains inside after attempt to drain
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
- Typical part-only price
- $15 - $55
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | N/A |
| part_number | TECO-DLA-001 |
| voltage_rating | 240V AC |
Common Questions
What does E3 error mean on TECO Washing Machine?
E3 error signifies a door lock malfunction, preventing the wash cycle from starting.
Can I fix TECO Washing Machine E3 error myself?
Yes, you can check if the door is fully closed and inspect the drain hose for blockages.
How much does it cost to fix E3 error?
Repair costs range from $30 to $120 depending on parts and labor.
When should I call a technician for E3?
Call a technician if the error persists after checking the lid switch and if water remains inside after attempting to drain.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!