TECO Washing Machine Error E2
⚡ Quick Answer: The TECO Washing Machine E2 error indicates a drainage malfunction, where the machine fails to drain water within the expected time. Common symptoms i... ✅ DIY Fixable
What Does Error E2 Mean?
The TECO Washing Machine E2 error indicates a drainage malfunction, where the machine fails to drain water within the expected time. Common symptoms include water not draining, pauses during the wash cycle, and standing water in the drum. This issue may stem from a blocked or kinked drain hose or a faulty drain pump. Taking prompt action can help resolve these problems and restore your machine's functionality.
Common Symptoms:
- Water not draining
- Cycle pauses or stops before completion
- Standing water remains in drum
Possible Causes
- Blocked or kinked drain hose/filter (medium)
- Faulty or failing drain pump (medium)
How to Fix Error E2
DIY Fix Check basic drainage components
- Power off the machine and unplug from power
- Inspect and straighten the drain hose to remove any kinks
- Remove and clean external filters and hose ends of lint/debris
- Ensure the drain hose outlet is at correct height and not blocked by home plumbing
Technician Only Inspect and service internal drain system
- Disconnect machine and access internal drain pump
- Test drain pump operation with multimeter and observe pump running
- Clear any internal blockages and replace pump if faulty
- Verify water level sensor and control board signals related to drainage
Parts needed: Drain pump, Hoses and filters, Water level sensor (if needed)
- Water remains un‑drained after basic checks
- Unusual noises from pump area
- Electrical faults visible or repeated errors
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 120W |
|---|---|
| component | Drain Pump |
| resistance | 10-15 ohms |
| part_number | TECO DP-1234 |
| voltage_rating | 240V AC |
Common Questions
What does E2 error mean on TECO Washing Machine?
E2 error signifies a drainage issue where the machine fails to drain water, causing pauses in the wash cycle.
Can I fix TECO Washing Machine E2 error myself?
Yes, you can check the drain hose for kinks and clean the filters to resolve the issue.
How much does it cost to fix E2 error?
Repair costs range from $50 to $200, depending on parts and labor in your region.
When should I call a technician for E2?
Call a technician if water remains un-drained after checking, or if you hear unusual noises from the pump.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!