TECO Washing Machine Error EE
⚡ Quick Answer: The TECO Washing Machine error code EE typically indicates a problem with the door lock mechanism, which may prevent the machine from starting or comp... ✅ DIY Fixable
What Does Error EE Mean?
The TECO Washing Machine error code EE typically indicates a problem with the door lock mechanism, which may prevent the machine from starting or completing its wash cycles. If this error occurs, it's essential to ensure the door is fully closed and latched, as well as to check for any blockages or issues with the water supply. If the error persists after basic troubleshooting, contacting a professional for further diagnosis may be necessary.
Possible Causes
- Door Lock Assembly
How to Fix Error EE
DIY Fix General troubleshooting due to lack of specific information
- Turn the washing machine off and unplug it.
- Wait 1–2 minutes, then plug it back in and try restarting to see if the code clears.
- Check basic conditions: ensure door/lid is fully closed and latched; verify water supply is connected and turned on; inspect for obvious blockages or kinks in inlet and drain hoses.
Technician Only Professional diagnosis due to undefined code
- Connect diagnostic tools or reference the specific model’s official service manual (if available) to decode EE.
- Check control board and internal sensors for logged faults if supported by manufacturer diagnostics.
- Test major subsystems (door lock, water inlet valve, drain pump, pressure/water level sensors) that typically generate error conditions in washing machines, guided by model-specific documentation.
Parts needed: Diagnostic interface/tool, Multimeter, Possible sensor or board replacements depending on diagnosis
- If the machine displays the EE code repeatedly after basic resets
- If the machine does not proceed with normal wash cycles
- If there are signs of electrical or mechanical faults such as burning smell or water leaks
Next step
Choose the next step for EE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | TECO-DLA-001 |
| voltage_rating | 240V AC |
Common Questions
What does EE error mean on TECO Washing Machine?
EE error indicates a malfunction in the door lock mechanism, preventing the machine from starting.
Can I fix TECO Washing Machine EE error myself?
Yes, you can try resetting the machine and checking the door latch and water supply.
How much does it cost to fix EE error?
Repair costs vary based on the fault and region; professional diagnosis may be needed.
When should I call a technician for EE?
Call a technician if the error persists after resets or if there are signs of electrical issues.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!