Teco Washing Machine Error E8

⚡ Quick Answer: The TECO Washing Machine error E8 typically indicates a malfunction in the water level sensor, which may cause the machine to stop mid-cycle or fail t... ✅ DIY Fixable

What Does Error E8 Mean?

The TECO Washing Machine error E8 typically indicates a malfunction in the water level sensor, which may cause the machine to stop mid-cycle or fail to fill and drain correctly. This issue can interfere with normal operation, leading to potential service needs. Basic troubleshooting includes checking the machine's level, ensuring the door is closed, and inspecting hoses for kinks or blockages. If these steps do not resolve the error, further diagnostics may be necessary.

Common Symptoms:

  • Washing machine stops mid-cycle with error display E8
  • Error appears during operation (fill/drain/spin)

Possible Causes

  • Water Level Sensor
  • Wiring Issues
  • Control Board Failure

How to Fix Error E8

DIY Fix Basic checks when E8 appears

  1. Turn off and unplug the washing machine for 5–10 minutes, then restart to see if the code clears (general reset attempt).
  2. Check that the machine is level and the door/lid is properly closed.
  3. Inspect visible hoses (inlet and drain) for obvious kinks or blockages.

Technician Only Diagnostic inspection for error code E8

  1. Refer to the specific TECO model’s service manual (if available) to locate any model-specific fault-code tables.
  2. Check wiring harnesses and connectors for loose contacts, especially between control board, sensors, and pump/motor assemblies.
  3. Verify operation of water level/pressure sensors and drain pump function.
  4. Use diagnostic tools to read any internal service codes and inspect control board communication integrity.

Parts needed: Water level/pressure sensor, Drain pump, Control board and wiring harnesses

🛑 When to Call a Pro:
  • If E8 persists after basic reset and visible checks.
  • If water does not drain properly, leaks occur, or unusual noises are present.
  • If you cannot access internal components safely.

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 5-15 ohms
part_number TECO WLS-001
voltage_rating 240V AC

Common Questions

What does E8 error mean on TECO Washing Machine?

E8 error indicates a water level sensor malfunction, causing the machine to stop mid-cycle or fail to fill/drain.

Can I fix TECO Washing Machine E8 error myself?

Yes, you can try basic troubleshooting like resetting the machine and checking for blockages.

How much does it cost to fix E8 error?

Repair costs vary widely based on the fault, from sensor replacement to control board service.

When should I call a technician for E8?

Call a technician if the error persists after troubleshooting, if there are drainage issues, or if you notice leaks or unusual noises.

Sources & References

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!