Teco Dishwasher Error ED

⚡ Quick Answer: The TECO dishwasher error code ED indicates a potential malfunction in the drain pump. Users may notice unusual noises during operation or the applian... ✅ DIY Fixable

What Does Error ED Mean?

The TECO dishwasher error code ED indicates a potential malfunction in the drain pump. Users may notice unusual noises during operation or the appliance's failure to drain water effectively. If you experience this error, start by ensuring the dishwasher door is fully closed and latched. A power reset may also help; turn off the dishwasher at the power source for a few minutes before restarting. If the issue persists, professional inspection is recommended.

Possible Causes

  • Drain Pump Assembly

How to Fix Error ED

DIY Fix Basic checks and reset

  1. Ensure the dishwasher door is fully closed and latched before starting a cycle.
  2. Turn off the dishwasher at the power source or circuit breaker for several minutes, then restore power and attempt a new cycle.

Technician Only Inspection by qualified service technician

  1. Review the specific model’s service manual for error code listings.
  2. Check door latch sensor and wiring harness for continuity and proper connection.
  3. Inspect control board communication pathways and connectors.

Parts needed: Door latch assembly, Control board and associated wiring harness

🛑 When to Call a Pro:
  • If the error persists after power reset and basic checks, contact TECO authorized service for proper diagnosis.

Technical Specifications

wattage 40W
component Drain Pump Assembly
resistance 10-20 ohms
part_number TECO DP123456
voltage_rating 120V AC

Common Questions

What does ED error mean on TECO Dishwasher?

The ED error indicates a malfunction in the drain pump, often leading to drainage issues.

Can I fix TECO Dishwasher ED error myself?

Yes, you can perform basic checks such as ensuring the door is latched and resetting the power.

How much does it cost to fix ED error?

Repair costs vary by region and the specific parts needed for the repair.

When should I call a technician for ED?

Contact a TECO authorized service if the error persists after performing basic checks.

Sources & References

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!