TECO Dishwasher Error E2
⚡ Quick Answer: The TECO Dishwasher E2 error code signals a drainage issue, often resulting in water remaining in the base of the dishwasher after a cycle. This may b... ✅ DIY Fixable
What Does Error E2 Mean?
The TECO Dishwasher E2 error code signals a drainage issue, often resulting in water remaining in the base of the dishwasher after a cycle. This may be accompanied by unusual sounds from the pump or a halt in the cycle. Common causes include blockages in the drain filter or hose, which can impede proper water flow. Regular maintenance and checks can help identify and resolve these problems.
Common Symptoms:
- Dishwasher displays E2 on control panel
- Water remains in dishwasher base after or during cycle
- Dishwasher cycle halts when error appears
Possible Causes
- Clogged drain filter
- Faulty drain pump
- Kinked drain hose
How to Fix Error E2
DIY Fix Basic checks for potential drainage or sensor issues
- Turn off power to the dishwasher and ensure it is safe to access components.
- Check the dishwasher’s drain filter for debris; clean if needed.
- Inspect the drain hose for kinks, blockages, or poor installation that could impede water flow.
- Verify water level float or water level sensor (if accessible) can move freely without obstruction.
- If error persists after basic drainage and sensor checks.
- If you cannot access or safely inspect internal components.
- If standing water is present and you suspect a pump or sensor failure.
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2 error mean on TECO Dishwasher?
E2 indicates a drainage issue, often with water remaining in the dishwasher after a cycle.
Can I fix TECO Dishwasher E2 error myself?
Yes, you can perform basic checks like cleaning the drain filter and inspecting the drain hose for blockages.
How much does it cost to fix E2 error?
Repair costs vary by model and region; consult a local technician for an estimate.
When should I call a technician for E2?
Call a technician if the error persists after your checks or if you can't safely access internal components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!