TECO Dishwasher Error E6
⚡ Quick Answer: The E6 error code on your TECO dishwasher indicates a potential malfunction in the drain pump, which may cause unusual sounds during operation and pre... ✅ DIY Fixable
What Does Error E6 Mean?
The E6 error code on your TECO dishwasher indicates a potential malfunction in the drain pump, which may cause unusual sounds during operation and prevent proper drainage of water. Regular maintenance and inspection are crucial to identify and resolve underlying issues.
Common Symptoms:
- E6 error displayed during dishwasher operation
- No official TECO dishwasher documentation found specifying E6 meaning
Possible Causes
- Drain Pump Failure
- Clogged Drain Filter
- Faulty Wiring
How to Fix Error E6
DIY Fix Check for common dishwasher issues (general advice)
- Power off and unplug the dishwasher before inspecting.
- Ensure the dishwasher is level and properly installed.
- Check for visible water leakage around the base of the dishwasher.
- Inspect filters and drain hose for clogs or kinks.
- Try resetting the dishwasher by disconnecting power for 1–2 minutes and reconnecting.
Technician Only Professional diagnosis and repair
- Technician to inspect internal sensors, wiring harness, and base for moisture/overflow detection components.
- Check drain system for blockages or pump malfunctions.
- Test key electronic components such as control board and relevant sensors.
- Replace faulty parts as confirmed by diagnostic testing.
Parts needed: Drain pump, Sensors (e.g., leak/overflow switch), Control board/wiring harness
- If error persists after basic checks and reset attempts
- If there is visible water leakage at the base
- If you cannot safely access or diagnose internal components
Next step
Choose the next step for E6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E6 error mean on TECO Dishwasher?
E6 error indicates a potential malfunction in the drain pump, causing drainage issues.
Can I fix TECO Dishwasher E6 error myself?
Yes, you can check for common issues, ensure proper installation, and inspect for leaks.
How much does it cost to fix E6 error?
Repair costs vary by region, typically including a service call and parts replacement.
When should I call a technician for E6?
Call a technician if the error persists after basic checks or if there is visible water leakage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!