TECO Dishwasher Error E5
⚡ Quick Answer: The TECO Dishwasher E5 error code indicates a malfunction that may involve the drain pump or door latch. Symptoms typically include the dishwasher sto... ✅ DIY Fixable
What Does Error E5 Mean?
The TECO Dishwasher E5 error code indicates a malfunction that may involve the drain pump or door latch. Symptoms typically include the dishwasher stopping during a cycle and failing to drain water, often accompanied by unusual noises. To address this issue, ensure the dishwasher door is fully closed and latched, check for any obstructions, and inspect for excess water in the base that may trigger a flood sensor.
Common Symptoms:
- Dishwasher stops during cycle when E5 is displayed
- Error may appear shortly after starting or during draining/filling phases (based on general dishwasher sources)
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E5
DIY Fix Basic checks that might relate to common dishwasher E5 symptoms
- Ensure the dishwasher door is fully closed and latched properly (E5 often indicates door not closed on some brands)
- Check for obstructions preventing door closure
- Inspect the interior base for excess water that could trigger a flood sensor and drain manually if needed (general dishwasher guidance)
Technician Only Inspect internal sensors and door/latch assembly
- Access internal control panel and wiring with power disconnected
- Check door latch mechanisms and interlock switch for proper function
- Verify any pressure/float sensors are connected and not damaged or blocked
Parts needed: Door latch/switch, Pressure/float sensor assembly, Wiring harness
- If door/latch checks and basic visual inspections do not clear the error
- If internal sensors or wiring faults are suspected
- If error persists after basic user‑level troubleshooting
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E5 error mean on TECO Dishwasher?
E5 indicates a potential malfunction with the drain pump or door latch, causing the dishwasher to stop and fail to drain.
Can I fix TECO Dishwasher E5 error myself?
Yes, check if the door is closed properly, look for obstructions, and inspect for excess water that may trigger sensors.
How much does it cost to fix E5 error?
Repair costs can vary, typically ranging from $50 to $200 depending on the parts needed.
When should I call a technician for E5?
Call a technician if basic checks do not resolve the error or if internal sensor or wiring issues are suspected.
Sources & References
- E5 Error Code - Dishwasher Help Centre (community)
- Dishwasher Error Codes: What They Mean & How to Fix Them (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!