TECO Dishwasher Error EC
⚡ Quick Answer: The TECO Dishwasher error code EC typically indicates a malfunction in the drain pump. Users may notice unusual sounds during operation and the dishwa... ✅ DIY Fixable
What Does Error EC Mean?
The TECO Dishwasher error code EC typically indicates a malfunction in the drain pump. Users may notice unusual sounds during operation and the dishwasher's failure to properly drain water. To address this issue, it's essential to verify the model number, consult the user manual for any specific error code definitions, and perform basic troubleshooting steps. Power cycling the unit, checking water supply connections, and ensuring the door is properly latched can often resolve this error.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error EC
DIY Fix Verify display context and model information
- Confirm the exact model number of your TECO dishwasher.
- Check the user manual for your specific model for any error code definitions, particularly EC.
- If the manual does not list EC, note when and how the error appears (during fill, drain, wash, etc.) and capture any additional indicators (lights/flashing patterns).
DIY Fix General basic troubleshooting
- Power off the dishwasher by disconnecting from the mains for a few minutes, then reconnect and restart.
- Ensure water supply is connected and turned on.
- Check for obvious issues such as a door not fully latched or blocked filters.
Technician Only Contact TECO support or authorized service technician
- Provide the model number and describe when EC appears.
- Request official documentation or diagnostic guidance for this error code on dishwashers.
- Technician may use model‑specific service tools to read internal diagnostics.
- If the error persists after basic user checks and power cycle.
Next step
Choose the next step for EC
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does EC error mean on TECO Dishwasher?
The EC error indicates a malfunction in the drain pump, often leading to failure to drain water.
Can I fix TECO Dishwasher EC error myself?
Yes, you can try basic troubleshooting like checking connections, power cycling, and ensuring the door is latched.
How much does it cost to fix EC error?
Repair costs vary by model and region, so it's best to consult a technician for an accurate estimate.
When should I call a technician for EC?
Call a technician if the error persists after performing basic troubleshooting and power cycling.
Sources & References
- TECO washing machine fault codes including EC (community)
- TECO washing machine EC error explanation (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!