Solt Dishwasher Error E12
⚡ Quick Answer: The Solt Dishwasher E12 error code indicates a drainage failure, which may be accompanied by unusual sounds from the pump and a flashing display. This... ✅ DIY Fixable
What Does Error E12 Mean?
The Solt Dishwasher E12 error code indicates a drainage failure, which may be accompanied by unusual sounds from the pump and a flashing display. This error typically signifies issues with the drainage process, potentially due to blockages or malfunctions in the pump or sensors. To address this, check your user manual, inspect for blockages in hoses and filters, and ensure the water supply is functioning correctly.
Possible Causes
- Drain Pump
- Clogged Filter
- Kinked Drain Hose
How to Fix Error E12
DIY Fix Check General Dishwasher Function and Manual
- Refer to your exact Solt dishwasher model user manual/ troubleshooting section — the official manual is available online for GGSDW6012S / GGSDW6012W, though error code definitions may not be included.
- Observe if there are additional indicators or lights, and note when E12 appears (e.g., during drain, wash, or fill).
- Try basic checks like ensuring proper water supply, filter and spray arms cleanliness, and no obvious blockages (common recommended general dishwasher maintenance).
Technician Only Professional Diagnostic
- Have a trained technician retrieve the diagnostic codes from the control board to confirm what E12 represents for your specific Solt model.
- Technician should inspect drain pump, inlet valve, float and other sensors as part of full diagnostics.
- Check wiring and communication between PCB modules if needed.
Parts needed: Diagnostics tools, Possible sensors or pumps depending on technician findings
- If the dishwasher repeatedly displays E12 and basic user troubleshooting (cycle off/on, checking hoses/filters) does not clear it.
- If there are signs of water leakage, strong burning smells, or failure to complete cycles.
Next step
Choose the next step for E12
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E12 error mean on Solt Dishwasher?
E12 indicates a drainage failure, often with unusual pump sounds and a flashing display.
Can I fix Solt Dishwasher E12 error myself?
Yes, check the user manual, inspect hoses and filters for blockages, and ensure water supply is adequate.
How much does it cost to fix E12 error?
Repair costs vary based on service region and the complexity of the issue.
When should I call a technician for E12?
Contact a technician if E12 persists after basic troubleshooting or if signs of leakage or burning smells are present.
Sources & References
- Solt GGSDW6012S User Manual Listings (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!