Solt Dishwasher Error E1
⚡ Quick Answer: The Solt Dishwasher E1 error indicates a drainage issue that often disrupts the wash cycle, potentially accompanied by a humming sound. Users may noti... ✅ DIY Fixable
What Does Error E1 Mean?
The Solt Dishwasher E1 error indicates a drainage issue that often disrupts the wash cycle, potentially accompanied by a humming sound. Users may notice the error code displayed on the control panel, and the dishwasher may either halt or fail to start entirely. To resolve this issue, check the water supply and drainage systems for blockages or kinks, and consider resetting the unit by turning it off and unplugging it for about five minutes.
Common Symptoms:
- Error E1 displayed on control panel
- Dishwasher cycle halts or will not start
Possible Causes
- Drain Pump
- Drain Hose
- Filter Blockage
How to Fix Error E1
DIY Fix Check basic conditions and reset
- Turn dishwasher off and unplug or switch off breaker for ~5 minutes then restore power (attempt control reset)
DIY Fix Inspect water supply and drainage
- Check that inlet water supply valve is fully open
- Inspect inlet hose for kinks or obstructions
- Ensure dishwasher drain hose and sink drain are not blocked
- Clean filters in dishwasher base if necessary
Technician Only Inspect internal sensors and flood/flood tray
- Remove base access panels
- Check for water in base tray — water presence may indicate leak/flood sensor activation
- Test flood/leak detection switch and water level sensor for proper function
Parts needed: flood/leak sensor, water level sensor
Technician Only Evaluate control electronics
- Test communications and signals between control board and sensors
- Replace failed sensors or control board if diagnosed with proper diagnostics tools
Parts needed: control board, sensors
- If error persists after basic user-level checks
- If water is observed in base tray or persistent leaks are present
- If internal component faults are suspected
Next step
Choose the next step for E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E1 error mean on Solt Dishwasher?
E1 indicates a drainage issue, causing the dishwasher to halt or not start.
Can I fix Solt Dishwasher E1 error myself?
Yes, check the water supply and drainage for blockages, and try resetting the dishwasher.
How much does it cost to fix E1 error?
Estimated repair costs range from $80 to $200, depending on the issue.
When should I call a technician for E1?
Call a technician if the error persists after checks or if you notice leaks.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!