Simpson Washing Machine Error E62
⚡ Quick Answer: The E62 error code on your Simpson Washing Machine indicates a malfunction in the motor drive unit, which may result in unusual sounds during operatio... ⚠️ Difficulty Varies
What Does Error E62 Mean?
The E62 error code on your Simpson Washing Machine indicates a malfunction in the motor drive unit, which may result in unusual sounds during operation and failure to spin. If you encounter this error, it may require professional diagnosis and potential replacement of components like the control board or sensors to restore normal functioning.
Possible Causes
- Motor Drive Unit
- Wiring Issues
- Control Board Malfunction
How to Fix Error E62
DIY Fix Basic power reset and check
- Unplug the washing machine from the power outlet.
- Wait 5–10 minutes to let the control electronics fully reset.
- Plug the machine back in and attempt to restart a cycle.
Technician Only Professional diagnosis required
- Inspect the machine with diagnostic tools to determine if the control board, motor sensors, or wiring are generating a fault.
- Check for any stored fault codes in a service/diagnostic mode if available for your Simpson model.
- Test key components (door lock, motor, pressure sensor, control board) as part of a systematic troubleshooting process.
Parts needed: Multimeter or diagnostic tool, Potential replacement parts depending on fault (e.g., control board, sensors)
- If the error reappears after basic reset attempts.
- If there are any signs of electrical smells, burning, or unusual noises.
- If service manual or dealer documentation for your specific Simpson model references fault codes requiring professional service.
Next step
Choose the next step for E62
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E62 error mean on Simpson Washing Machine?
E62 indicates a malfunction in the motor drive unit, leading to unusual sounds and failure to spin.
Can I fix Simpson Washing Machine E62 error myself?
You can try a basic power reset by unplugging the machine for 5-10 minutes before restarting.
How much does it cost to fix E62 error?
Repair costs vary based on diagnosis and parts needed, including service call fees.
When should I call a technician for E62?
Call a technician if the error persists after a reset, or if you notice electrical smells or unusual noises.
Sources & References
- Simpson Troubleshooter Support Page (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!