Simpson Washing Machine Error E11
⚡ Quick Answer: The Simpson Washing Machine error E11 indicates a water fill fault, meaning the machine is unable to fill with water during the wash cycle. This can b... ✅ DIY Fixable
What Does Error E11 Mean?
The Simpson Washing Machine error E11 indicates a water fill fault, meaning the machine is unable to fill with water during the wash cycle. This can be caused by issues such as the water supply being turned off, kinked hoses, clogged inlet filters, or a faulty water inlet valve. If the error persists, further inspection of internal components may be necessary.
Common Symptoms:
- Error E11 displayed on control panel during wash cycle
- Machine fails to fill with water
- Wash cycle won’t start or stalls at water fill phase
Possible Causes
- Water supply not reaching the machine (tap off, kinked hose) (medium)
- Clogged inlet filter or screen restricting water flow (medium)
- Faulty water inlet valve preventing water fill (medium)
How to Fix Error E11
DIY Fix Check basic water supply
- Ensure external water tap feeding the washer is fully open.
- Inspect inlet hoses for kinks, twists, or visible damage.
- Disconnect hoses and clean any inlet filters/screens.
Technician Only Inspect and service water inlet valve and internal filters
- Test inlet valve coils for continuity and correct operation.
- Replace inlet valve if defective.
- Inspect internal water level sensor and pressure switch hose for blockages.
Parts needed: Water inlet valve, Inlet hose filters, Pressure switch assembly
- If error persists after checking water supply and basic cleaning
- If internal components like the inlet valve or pressure sensor are suspected faulty
Next step
Choose the next step for E11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E11 error mean on Simpson Washing Machine?
E11 error signifies a water fill fault, preventing the machine from filling with water during the wash cycle.
Can I fix Simpson Washing Machine E11 error myself?
Yes, you can check the water supply, inspect hoses for kinks, and clean inlet filters.
How much does it cost to fix E11 error?
Repair costs range from $50 to $200, depending on parts and labor in your area.
When should I call a technician for E11?
Call a technician if the error persists after checking the water supply and performing basic cleaning.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!