Simpson Washing Machine Error E60
⚡ Quick Answer: The E60 error code on your Simpson Washing Machine indicates a malfunction in the Motor Drive Unit, which may lead to unusual sounds during operation ... ✅ DIY Fixable
What Does Error E60 Mean?
The E60 error code on your Simpson Washing Machine indicates a malfunction in the Motor Drive Unit, which may lead to unusual sounds during operation or an inability to spin. It's commonly associated with a heating circuit fault, causing the cycle to stop or fail to proceed normally. Troubleshooting steps include turning off the machine, unplugging it for 5-10 minutes, and then reconnecting power to attempt a reset.
Common Symptoms:
- Error code E60 displayed on control panel
- Cycle may stop or fail to proceed normally
Possible Causes
- Possible heating circuit fault (community forum listing) (low)
How to Fix Error E60
DIY Fix Basic checks and reset
- Turn off and unplug the washing machine.
- Wait 5–10 minutes and reconnect power to reset the control system.
- Restart a basic wash cycle to see if the error clears.
Technician Only Heating circuit diagnostic
- Inspect the heating element and associated wiring for continuity and proper connection.
- Check temperature sensor/thermistor readings according to model specifications.
- Verify control board heating relay/triac function.
Parts needed: Heating element, Temperature sensor/thermistor, Control board
- If after a basic reset the E60 error persists.
- If user is uncomfortable working with electrical components.
- If testing reveals a faulty heating element, sensor, or control board.
Next step
Choose the next step for E60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E60 error mean on Simpson Washing Machine?
E60 error indicates a malfunction in the Motor Drive Unit, often linked to a heating circuit fault.
Can I fix Simpson Washing Machine E60 error myself?
Yes, you can perform basic checks and resets by unplugging the machine for 5-10 minutes and restarting a wash cycle.
How much does it cost to fix E60 error?
Repair costs vary widely; heating element replacements are typically moderate, while control board repairs can be higher.
When should I call a technician for E60?
Call a technician if the E60 error persists after a reset or if you're uncomfortable working with electrical components.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!