Simpson Washing Machine Error E55

⚡ Quick Answer: The E55 error code on a Simpson washing machine indicates a malfunction in the motor drive unit. This issue may manifest as unusual sounds during oper... ✅ DIY Fixable

What Does Error E55 Mean?

The E55 error code on a Simpson washing machine indicates a malfunction in the motor drive unit. This issue may manifest as unusual sounds during operation or a failure to spin. To troubleshoot, users can attempt basic checks such as turning the machine off and on, ensuring water taps are fully open, and confirming that the door is securely closed. If the error persists or if other problems arise, such as water leaks or strange noises, further diagnostic evaluation may be necessary.

Possible Causes

  • Motor Drive Unit
  • Wiring Issues
  • Control Board Malfunction

How to Fix Error E55

DIY Fix Basic checks for unlisted/all washing machine error codes

  1. Turn the machine off, wait 10–30 seconds, then turn it back on to see if the code persists.
  2. Ensure water taps are fully open and inlet hoses are not kinked or blocked.
  3. Check that the lid/door is fully closed and latched properly.
  4. Inspect and clean inlet mesh filters and drain pump filter (if accessible).
  5. Redistribute laundry to avoid large imbalances in the drum.

Technician Only Diagnostic evaluation for unrecognized error code

  1. Connect a service diagnostic tool or enter the washer’s diagnostic/service mode (if available) to read any logged fault codes beyond the front panel display.
  2. Refer to the specific model’s service documentation or contact Simpson support for E55 definition.
  3. Visually inspect wiring harnesses and connectors for damage or corrosion.
  4. Measure the inlet valve, pressure sensor, drain pump, motor circuits and compare readings to specification.

Parts needed: Diagnostic tool, Multimeter, Service manual

🛑 When to Call a Pro:
  • If the machine displays an unrecognized code continuously and basic checks do not clear it
  • If water leaks, unusual noises, burning smells, or repeated failures occur

Technical Specifications

wattage 500W
component Motor Drive Unit
resistance 1-5 ohms
part_number Simpson 123456789
voltage_rating 240V AC

Common Questions

What does E55 error mean on Simpson Washing Machine?

E55 indicates a malfunction in the motor drive unit, often causing failure to spin.

Can I fix Simpson Washing Machine E55 error myself?

Yes, you can perform basic checks like restarting the machine and ensuring proper water supply and door closure.

How much does it cost to fix E55 error?

Repair costs for the E55 error can range from ¥5,000 to ¥25,000, depending on the technician and region.

When should I call a technician for E55?

Call a technician if the E55 error persists after basic checks or if you notice unusual noises or leaks.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!