Simpson Washing Machine Error E32

⚡ Quick Answer: The E32 error code on your Simpson Washing Machine indicates a problem with the door lock mechanism, often linked to unstable water level readings fro... ⚠️ Difficulty Varies

What Does Error E32 Mean?

The E32 error code on your Simpson Washing Machine indicates a problem with the door lock mechanism, often linked to unstable water level readings from the pressure sensor. This fault can prevent the machine from starting or progressing through wash and drain cycles, causing the display to flash. Common causes include a blocked pressure sensor tube, leaky inlet valve, or a faulty pressure sensor. Addressing these issues promptly can restore your machine's functionality.

Common Symptoms:

  • Machine displays E32 during wash/drain cycle
  • Water level readings fluctuate or are not stable
  • Machine may fail to proceed past water level detection/drain stages

Possible Causes

  • Blocked pressure sensor tube/pressure chamber (medium)
  • Leaky inlet valve affecting water level sensing (medium)
  • Faulty pressure sensor (medium)
  • Faulty main PCB not interpreting pressure sensor signal (medium)

How to Fix Error E32

DIY Fix Initial checks and reset

  1. Turn power off and unplug machine
  2. Ensure drain and pressure hoses are not kinked or blocked
  3. Check for visible water inlet leaks
  4. Plug back in and restart cycle to see if error clears

Technician Only Pressure sensor system diagnostic and repair

  1. Inspect pressure sensor tube and chamber for blockages or damage
  2. Test pressure sensor functionality with appropriate tools
  3. Inspect wiring harness/connectors between sensor and PCB
  4. Replace pressure sensor if faulty
  5. Replace main PCB if sensor and harness are confirmed good but E32 persists

Parts needed: Pressure sensor, Pressure hose/tube, Main control PCB, Connectors/wiring harness

🛑 When to Call a Pro:
  • If error persists after pressure sensor tube clearing and basic checks
  • If there are signs of water leaks inside machine
  • If machine shows additional fault codes or erratic behavior

Next step

Choose the next step for E32

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance N/A
part_number Simpson 123456
voltage_rating 240V AC

Common Questions

What does E32 error mean on Simpson Washing Machine?

E32 indicates a door lock issue linked to unstable water level readings, preventing machine operation.

Can I fix Simpson Washing Machine E32 error myself?

Yes, you can attempt initial checks like inspecting hoses and resetting the machine.

How much does it cost to fix E32 error?

Repair costs range from $100 to $450, depending on the parts and service needed.

When should I call a technician for E32?

Contact a technician if the error persists after basic checks or if there are signs of leaks.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!