Simpson Washing Machine Error E22
⚡ Quick Answer: The Simpson Washing Machine error E22 indicates a drainage issue, typically resulting in the wash cycle stopping mid-cycle and the machine failing to ... ✅ DIY Fixable
What Does Error E22 Mean?
The Simpson Washing Machine error E22 indicates a drainage issue, typically resulting in the wash cycle stopping mid-cycle and the machine failing to drain properly. This error is often accompanied by unusual sounds from the drain pump. Common causes include a blockage in the drain filter or hose and a malfunctioning drain pump.
Common Symptoms:
- Wash cycle stops mid‑cycle
- Machine fails to drain properly
- Error code appears on display preventing normal operation
Possible Causes
- Drain blockage (pump filter or hose) (medium)
- Drain pump malfunction (medium)
How to Fix Error E22
DIY Fix Check and Clear Drain Filters and Hoses
- Unplug the washing machine from the power outlet.
- Locate and open the drain pump filter access panel at the front bottom of the machine.
- Place a towel and shallow tray to catch water, then unscrew the filter cap.
- Remove any debris (lint, coins, small objects) from the filter.
- Inspect the drain hose for kinks or blockages and clear any obstructions.
- Reassemble the filter and reconnect power, then run a short drain cycle to test.
Technician Only Inspect or Replace Drain Pump Assembly
- Disconnect power and water supply to the washing machine.
- Remove the back or bottom panel to access the drain pump.
- Verify the pump impeller spins freely; check electrical continuity of the pump motor.
- Replace the drain pump if it fails to operate or shows electrical faults.
- Reassemble the machine and test operation.
Parts needed: Drain pump assembly, Drain hose
- If drainage components are clear but the error persists, indicating possible internal electrical or sensor issues.
- If attempting to access internal parts feels unsafe or beyond your comfort level.
Next step
Choose the next step for E22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E22 error mean on Simpson Washing Machine?
E22 indicates a drainage problem, stopping the wash cycle and preventing proper drainage.
Can I fix Simpson Washing Machine E22 error myself?
Yes, you can check and clear drain filters and hoses to resolve the issue.
How much does it cost to fix E22 error?
The estimated repair cost ranges from AUD $100 to $250, including parts and labor.
When should I call a technician for E22?
Call a technician if drainage components are clear but the error persists or if accessing internal parts feels unsafe.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!