Simpson Dryer Error E62

⚡ Quick Answer: The Simpson dryer error code E62 typically indicates a malfunction related to the heating element, which may prevent the dryer from generating heat du... ✅ DIY Fixable

What Does Error E62 Mean?

The Simpson dryer error code E62 typically indicates a malfunction related to the heating element, which may prevent the dryer from generating heat during operation. If this error appears, it is advisable to first reset the unit by unplugging it for a few minutes. If the issue persists, further investigation may be necessary to determine the underlying cause.

Possible Causes

  • Heating Element
  • Thermal Fuse
  • Wiring Issues

How to Fix Error E62

DIY Fix Basic troubleshooting for unexplained dryer error codes

  1. Turn off and unplug the dryer from the power outlet.
  2. Wait several minutes then plug it back in and power on to see if the code clears.
  3. Check and clean the lint filter and external exhaust vent to ensure airflow isn’t severely restricted.
  4. Ensure the dryer isn’t overloaded and restart a simple drying cycle.
🛑 When to Call a Pro:
  • If the error code persists after reset and basic maintenance
  • If the dryer exhibits unusual noises, smells, or overheating
  • If you’re uncomfortable inspecting electrical components

Next step

Choose the next step for E62

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Heating Element

Heats the water or air inside the appliance to the required temperature.

Typical part-only price
$40 - $95
DIY difficulty
Medium
Estimated time
30-45 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Thermal Fuse

A safety device that cuts off power to the appliance if it starts to overheat.

$10 - $20 · Easy · 10-20 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 5000W
component Heating Element
resistance 10-30 ohms
part_number Simpson 123456789
voltage_rating 240V AC

Common Questions

What does E62 error mean on Simpson dryer?

E62 error on a Simpson dryer indicates a potential issue with the heating element, resulting in no heat during drying.

Can I fix Simpson dryer E62 error myself?

Yes, you can attempt to fix the E62 error by resetting the dryer and performing basic maintenance like cleaning the lint filter.

How much does it cost to fix E62 error?

Repair costs for the E62 error can vary based on the model and region, so it's best to consult a local technician.

When should I call a technician for E62?

You should call a technician if the error persists after a reset, or if you notice unusual noises, smells, or overheating.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!