Simpson Dryer Error E60
⚡ Quick Answer: The Simpson dryer error E60 typically indicates a malfunction in the heating system, resulting in the dryer failing to produce heat during operation. ... ✅ DIY Fixable
What Does Error E60 Mean?
The Simpson dryer error E60 typically indicates a malfunction in the heating system, resulting in the dryer failing to produce heat during operation. This can lead to interruptions in drying cycles, where the dryer may stop mid-cycle or fail to heat adequately. Common issues may involve the heating element, thermostat, or airflow obstructions. Regular maintenance, such as cleaning the lint filter and ensuring proper ventilation, can help prevent this error from occurring.
Common Symptoms:
- Dryer stops mid‑cycle
- Dryer does not heat during drying
- Heating interruption or overheating indicated
Possible Causes
- Heating Element
- Thermal Fuse
- Wiring Issues
How to Fix Error E60
DIY Fix Basic checks that may address common heating/airflow issues
- Ensure lint filter is clean and free of lint buildup.
- Check the vent or condenser area (if applicable) for obstructions restricting airflow.
- Unplug the dryer for several minutes, then plug it back in to attempt a reset.
Technician Only Inspect and diagnose dryer heating system components
- Test the thermal fuse for continuity and replace if blown.
- Check the heating element for damage or open circuit and replace if faulty.
- Inspect airflow pathways including vent ducts for significant blockages.
- Confirm thermostats/temperature sensors are within specification.
Parts needed: Thermal fuse, Heating element, Thermostat/temperature sensors, Vent hose and ducts
- Error persists after basic cleaning and reset attempts
- Dryer overheats or emits unusual smells
- Internal component failures suspected (heating element, sensors, control board)
Next step
Choose the next step for E60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
- Typical part-only price
- $10 - $20
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | SIM-HEAT-001 |
| voltage_rating | 240V AC |
Common Questions
What does E60 error mean on Simpson dryer?
E60 error indicates a malfunction in the heating system, leading to inadequate heat during drying.
Can I fix Simpson dryer E60 error myself?
Yes, you can perform basic checks like cleaning the lint filter and ensuring proper airflow.
How much does it cost to fix E60 error?
Repair costs range from $100 to $350+, depending on parts replaced and labor.
When should I call a technician for E60?
Call a technician if the error persists after cleaning, if the dryer overheats, or if you suspect internal component failure.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!