Simpson Dryer Error E11

⚡ Quick Answer: The Simpson dryer E11 error typically indicates a malfunction in the heating element, preventing the dryer from generating heat during its operation. ... ✅ DIY Fixable

What Does Error E11 Mean?

The Simpson dryer E11 error typically indicates a malfunction in the heating element, preventing the dryer from generating heat during its operation. This can lead to clothes not drying effectively. Check the dryer for power, ensure the door is securely closed, and clean the lint filter and vent exhaust to eliminate potential blockages. If the issue persists, further investigation may be necessary.

Possible Causes

  • Heating Element

How to Fix Error E11

DIY Fix Check basic dryer operation

  1. Ensure the dryer is correctly powered and the door is fully closed.
  2. Clean the lint filter and check the vent exhaust for blockages.
  3. Unplug the dryer for at least 1–2 minutes and reconnect to see if the display clears.
🛑 When to Call a Pro:
  • If the error persists after basic checks and the dryer will not complete a cycle.
  • If there are unusual noises, smells, or signs of mechanical or electrical failure.

Next step

Choose the next step for E11

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Heating Element

Heats the water or air inside the appliance to the required temperature.

Typical part-only price
$40 - $95
DIY difficulty
Medium
Estimated time
30-45 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 5000W
component Heating Element
resistance 10-30 ohms
part_number SIM-HEAT-001
voltage_rating 240V AC

Common Questions

What does E11 error mean on Simpson dryer?

E11 error usually means there's a heating element malfunction, causing the dryer not to produce heat.

Can I fix Simpson dryer E11 error myself?

Yes, check power, ensure the door is closed, and clean the lint filter and vent exhaust.

How much does it cost to fix E11 error?

Repair costs vary by model and region; check with local technicians for estimates.

When should I call a technician for E11?

Call a technician if the error persists after basic checks or if there are unusual noises or smells.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!