Simpson Dryer Error E50
⚡ Quick Answer: The Simpson dryer E50 error indicates a potential malfunction in the drive motor, which may lead to the dryer stopping mid-cycle, unusual sounds, or f... ⚠️ Difficulty Varies
What Does Error E50 Mean?
The Simpson dryer E50 error indicates a potential malfunction in the drive motor, which may lead to the dryer stopping mid-cycle, unusual sounds, or failure to start. If the motor isn't turning or the drum isn't rotating, these could be signs of a more serious issue. It's essential to address this promptly to avoid further damage.
Common Symptoms:
- Dryer stops mid cycle and displays E50 (reported for other brands)
- Motor not turning / drum not rotating (community reports for similar E50 codes on other dryer brands)
Possible Causes
- Drive Motor
- Wiring Issues
- Control Board Malfunction
How to Fix Error E50
DIY Fix Attempt basic reset
- Unplug the dryer from the power outlet.
- Wait at least 30–60 seconds.
- Plug the dryer back into the outlet and power it on.
Technician Only Professional inspection for motor/drive issues
- Visually inspect motor drive assembly and belts.
- Test motor continuity with a multimeter.
- Check wiring harness and connections to motor and control board.
- Diagnose control board faults if motor and wiring test normal.
Parts needed: Motor assembly, Drive belt, Wiring harness, Control board
- If basic reset does not clear the error and the dryer still fails to operate normally.
- If you observe unusual noises, burning smells, or the drum does not rotate at all.
Next step
Choose the next step for E50
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Belt
Transfers rotational power from the motor to turn the drum or tub.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 20-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Drive Motor |
| resistance | 1-5 ohms |
| part_number | SIM-DRY-001 |
| voltage_rating | 240V AC |
Common Questions
What does E50 error mean on Simpson dryer?
E50 signifies a potential drive motor malfunction, causing the dryer to stop mid-cycle.
Can I fix Simpson dryer E50 error myself?
You can attempt a basic reset by unplugging the dryer for 30–60 seconds.
How much does it cost to fix E50 error?
The repair cost typically ranges from 100 to 400+ USD, depending on necessary parts.
When should I call a technician for E50?
Call a technician if the error persists after a reset or if you notice unusual noises or burning smells.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!