Simpson Dryer Error E33
⚡ Quick Answer: The Simpson dryer E33 error indicates a potential malfunction in the heating element, often resulting in insufficient heat during drying cycles. If yo... ✅ DIY Fixable
What Does Error E33 Mean?
The Simpson dryer E33 error indicates a potential malfunction in the heating element, often resulting in insufficient heat during drying cycles. If you experience this error, it may hinder the dryer’s ability to effectively dry clothes, leading to prolonged drying times or damp laundry after a cycle.
Possible Causes
- Heating Element
- Thermal Fuse
- Wiring Issues
How to Fix Error E33
DIY Fix Check basic dryer function and connections
- Power off the dryer and unplug it from the mains.
- Wait a few minutes and plug it back in to see if the error clears.
- Check that the lint filter is clean and that the venting around the dryer is not blocked.
Technician Only Refer to model‑specific Simpson service manual
- Identify the exact model number of the Simpson dryer.
- Obtain the official service manual for that model from manufacturer or authorized service sources.
- Use the manual’s error code section to find the precise definition and troubleshooting steps for error code E33.
- If the error code persists after power cycling and basic checks.
- If the dryer shows signs of electrical issues (e.g., sparks, burning smell).
- If internal inspection beyond simple cleaning is required.
Next step
Choose the next step for E33
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E33 error mean on simpson dryer?
The E33 error indicates a malfunction in the heating element, resulting in a lack of heat during drying.
Can I fix simpson dryer E33 error myself?
Yes, you can try basic troubleshooting like power cycling the dryer and ensuring the lint filter is clean.
How much does it cost to fix E33 error?
Repair costs can vary by model and region; it's best to consult a local technician for a quote.
When should I call a technician for E33?
Call a technician if the error persists after basic checks or if you notice electrical issues like sparks or burning smells.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!