Simpson Dryer Error E32
⚡ Quick Answer: The Simpson dryer error E32 indicates a potential malfunction related to the thermistor. This issue can result in the dryer overheating or failing to ... ✅ DIY Fixable
What Does Error E32 Mean?
The Simpson dryer error E32 indicates a potential malfunction related to the thermistor. This issue can result in the dryer overheating or failing to heat properly, leading to inefficient drying. If this error code appears on your control panel, it's essential to check basic conditions like ensuring the dryer door is securely closed and cleaning the lint filter. Power cycling the dryer may also help clear the error.
Common Symptoms:
- Error E32 displays on Simpson dryer control panel
Possible Causes
- Thermistor failure
How to Fix Error E32
DIY Fix Check basic conditions
- Ensure the dryer door is fully closed and latched.
- Clean the lint filter and ensure vents are not clogged.
- Power cycle the dryer by unplugging it for a few minutes and then plugging it back in to see if the code clears.
Technician Only Inspect internal sensors and wiring
- With power disconnected, open the dryer access panels.
- Visually inspect key sensors (moisture/temperature) and associated wiring harnesses for signs of damage or loose connectors.
- Test sensor continuity with a multimeter if appropriate.
- Reassemble and test dryer operation with technician supervision.
Parts needed: Multimeter for testing, Replacement sensor(s) if faults are found
- If the error persists after basic user‑level checks and safe power cycling.
- If any wiring or internal component damage is suspected.
- If you are not comfortable performing electrical diagnostics.
Next step
Choose the next step for E32
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Thermistor |
| resistance | 10k ohms at 25°C |
| part_number | SDRY-THERM-001 |
| voltage_rating | 240V AC |
Common Questions
What does E32 error mean on Simpson dryer?
E32 indicates a potential thermistor malfunction, causing overheating or ineffective drying.
Can I fix Simpson dryer E32 error myself?
Yes, check if the dryer door is closed, clean the lint filter, and power cycle the dryer.
How much does it cost to fix E32 error?
Repair costs range from $50 to $200, depending on parts and labor.
When should I call a technician for E32?
Call if the error persists after basic checks or if internal damage is suspected.
Sources & References
- Simpson Troubleshooter and support resources (community)
- Simpson dryer manuals listing (no E32 info found) (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!