Simpson Dryer Error E23

⚡ Quick Answer: The Simpson dryer error code E23 indicates a potential malfunction in the heating element, leading to the dryer not producing heat during operation. U... ✅ DIY Fixable

What Does Error E23 Mean?

The Simpson dryer error code E23 indicates a potential malfunction in the heating element, leading to the dryer not producing heat during operation. Users may experience issues with drying clothes effectively. To troubleshoot, start by power cycling the dryer—unplug it for a few minutes and then plug it back in. Ensure the door is fully closed, check for overload, and clean the lint filter and vents to improve airflow.

Possible Causes

  • Heating Element

How to Fix Error E23

DIY Fix Check basic dryer conditions

  1. Power cycle the dryer: unplug it for a few minutes then plug it back in to see if the code clears.
  2. Ensure the dryer door is fully closed and latched.
  3. Check that the dryer isn’t overloaded and clean the lint filter and vents.

Technician Only Diagnostic inspection by qualified service

  1. Consult the exact Simpson dryer model’s service manual for error code definitions.
  2. Use diagnostic tools to read any service menu or fault logs if available on the model.
  3. Inspect key components such as sensors, wiring, and control board if error persists.

Parts needed: diagnostic tool, potential sensors or control board if identified

🛑 When to Call a Pro:
  • If the error code persists after basic power cycling and cleaning.
  • If the dryer exhibits unusual noises, smells, heating issues or fails to start.

Next step

Choose the next step for E23

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 5000W
component Heating Element
resistance 10-30 ohms
part_number SIM-HEAT-001
voltage_rating 240V AC

Common Questions

What does E23 error mean on simpson dryer?

E23 indicates a malfunction in the heating element, causing the dryer to not produce heat.

Can I fix simpson dryer E23 error myself?

Yes, you can attempt basic checks like power cycling, ensuring the door is closed, and cleaning the lint filter.

How much does it cost to fix E23 error?

Repair costs can vary; a service call fee typically applies for professional assistance.

When should I call a technician for E23?

Call a technician if the error persists after basic troubleshooting or if you notice unusual noises or smells.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!