Simpson Dryer Error E22
⚡ Quick Answer: The Simpson dryer E22 error code indicates a potential malfunction in the heating element, causing the dryer to fail in producing heat during operatio... ✅ DIY Fixable
What Does Error E22 Mean?
The Simpson dryer E22 error code indicates a potential malfunction in the heating element, causing the dryer to fail in producing heat during operation. This issue can lead to clothes remaining damp after a cycle. It's important to conduct basic checks, such as ensuring the dryer door is properly closed and cleaning the lint filter, as these can sometimes resolve the error. If the problem persists, further diagnosis may be needed.
Common Symptoms:
- Error E22 displayed on dryer control panel
Possible Causes
- Heating Element
- Thermal Fuse
- Wiring Issues
How to Fix Error E22
DIY Fix Check manual and manufacturer support
- Locate and consult your specific Simpson dryer user manual for any documented error code definitions; Simpson manuals are available on the manufacturer support page.
- If no code definition is present, check the troubleshooting section for guidance on error displays.
- Perform basic checks such as ensuring the dryer door is fully closed and lint filters are clean (general maintenance, as manuals stress filter cleaning after each load).
- If the error persists after basic user checks and no information specific to Simpson dryers can be found in your manual or official support.
Next step
Choose the next step for E22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | SDR-ELE-12345 |
| voltage_rating | 240V AC |
Common Questions
What does E22 error mean on Simpson dryer?
E22 indicates a malfunction in the heating element, preventing heat production.
Can I fix Simpson dryer E22 error myself?
Yes, check the manual, ensure the door is closed, and clean the lint filter.
How much does it cost to fix E22 error?
Repair costs vary by model and region; it's best to consult local technicians.
When should I call a technician for E22?
Call a technician if the error persists after basic troubleshooting steps.
Sources & References
- Simpson Support - Troubleshooter (official)
- Simpson Australia User Manuals (official)
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!