Siemens Washing Machine Error F16
⚡ Quick Answer: The Siemens Washing Machine error code F16 indicates a malfunction in the door lock mechanism. This error occurs when the machine detects that the doo... ✅ DIY Fixable
What Does Error F16 Mean?
The Siemens Washing Machine error code F16 indicates a malfunction in the door lock mechanism. This error occurs when the machine detects that the door is not properly locked or latched, preventing the wash cycle from starting. Common symptoms include a flashing display, a door that appears closed but is not engaging properly, or a door that may be jammed or obstructed. To resolve this, check for any obstructions, ensure the door is firmly closed, and attempt to restart the machine.
Common Symptoms:
- Machine refuses to start a wash cycle when F16 is displayed
- Door appears closed but not locking/engaging properly
- Door may be physically jammed or obstructed
Possible Causes
- Door not properly locked (obstruction or laundry caught) (high)
- Faulty door lock mechanism or latch (high)
- Damaged door frame or related mechanical components affecting lock engagement (medium)
How to Fix Error F16
DIY Fix Check and reset door closure
- Ensure no laundry or obstruction caught between door and seal
- Open and firmly close the door until it latches
- Press the start/reload button to attempt restart
- Power cycle the machine if needed (turn off, wait a few minutes, then power on)
Technician Only Inspect and replace door lock/latch assembly
- Disconnect power and water supply
- Remove the door seal and access the door lock mechanism
- Check the locking unit, latch pin, and associated wiring for damage or wear
- Replace the faulty door lock assembly and test operation
Parts needed: Door lock assembly, Latch mechanism
- If after checking and reseating the door the error persists
- If door lock mechanism shows signs of internal damage or you cannot safely access internal components
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5W |
|---|---|
| component | Door Lock Assembly |
| resistance | 0-2 ohms |
| part_number | Siemens 00612806 |
| voltage_rating | 230V AC |
Common Questions
What does F16 error mean on Siemens Washing Machine?
F16 indicates a malfunction in the door lock mechanism, preventing the machine from starting.
Can I fix Siemens Washing Machine F16 error myself?
Yes, check for obstructions, ensure the door is properly closed, and try restarting the machine.
How much does it cost to fix F16 error?
The estimated repair cost ranges from $50 to $200, depending on model and parts.
When should I call a technician for F16?
Call a technician if the error persists after reseating the door or if the lock mechanism shows signs of damage.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!