Siemens Washing Machine Error E02
⚡ Quick Answer: The Siemens Washing Machine error E02 indicates a drainage issue or a drive/motor detection fault, which prevents the machine from detecting motor rot... ✅ DIY Fixable
What Does Error E02 Mean?
The Siemens Washing Machine error E02 indicates a drainage issue or a drive/motor detection fault, which prevents the machine from detecting motor rotation. Symptoms include failure to start spinning, stopping shortly after filling with water, and unusual sounds during operation. Address potential causes such as a faulty motor tachogenerator, worn motor brushes, or damaged wiring.
Common Symptoms:
- Washer fails to start spinning and may stop after water fill
- Error appears soon after starting a cycle
- Machine may not detect motor rotation
Possible Causes
- Motor tachogenerator/speed sensor fault (medium)
- Worn or faulty motor brushes (medium)
- Loose/damaged drive wiring or connectors (medium)
How to Fix Error E02
DIY Fix Basic checks before service
- Turn machine off and unplug it from mains.
- Wait a few minutes and plug back in to see if the error clears.
- Ensure no visible signs of loose power or poor electrical connection at the outlet.
Technician Only Inspect drive system (tachogenerator/motor brushes/wiring)
- Open the machine and inspect the tachogenerator on the motor for secure connection and physical damage.
- Check motor brushes for wear; replace if worn.
- Inspect and secure wiring between motor, tachogenerator and control board.
- Test motor rotation detection signal with suitable diagnostic tools.
Parts needed: Tachogenerator/speed sensor, Motor brushes, Motor wiring harness
- If error persists after basic reset and checks
- If there are signs of burning smell or visible damage inside the machine
- If internal components (motor, tachogenerator) are worn or damaged
Next step
Choose the next step for E02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 120W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Siemens 00167929 |
| voltage_rating | 230V AC |
Common Questions
What does E02 error mean on Siemens Washing Machine?
E02 indicates a drainage or motor detection fault, causing the washer to stop shortly after starting.
Can I fix Siemens Washing Machine E02 error myself?
Yes, you can try basic checks like resetting the machine and checking for loose connections.
How much does it cost to fix E02 error?
Estimated repair costs range from $80 to $250, depending on parts and labor.
When should I call a technician for E02?
Call a technician if the error persists after a reset, or if you notice burning smells or visible damage.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!