Siemens Washing Machine Error E06
⚡ Quick Answer: The Siemens Washing Machine E06 error indicates a malfunction in the drainage system, preventing the machine from draining water effectively. This iss... ✅ DIY Fixable
What Does Error E06 Mean?
The Siemens Washing Machine E06 error indicates a malfunction in the drainage system, preventing the machine from draining water effectively. This issue often results in water remaining in the drum after a cycle, unusual noises during the drain cycle, and the door potentially remaining locked if water is still present. Most commonly, this is caused by a clogged drain pump filter or drainage pathway, which can usually be resolved with simple maintenance.
Common Symptoms:
- Machine fails to drain water
- Water remains in drum after cycle
- Unusual sounds during drain cycle
- Door may not unlock if water remains
Possible Causes
- Clogged drain pump filter or drainage path (high)
- Obstruction inside drain pump (debris, small items, foreign objects) (medium)
- Kinked or restricted drain hose (medium)
How to Fix Error E06
DIY Fix Check and clean drain filter
- Turn off and unplug the washing machine
- Open the front bottom maintenance cover
- Place a shallow tray/towel beneath filter area
- Turn filter cap counter‑clockwise to remove
- Clear visible debris and rinse filter under water
- Reinstall filter securely and close cover
- Run a drain or rinse program to test
DIY Fix Inspect drain hose for kinks or blockages
- Unplug the washing machine
- Move machine if necessary to access rear
- Visually inspect drain hose for tight bends or compressions
- Straighten hose and remove any visible obstructions
- Reconnect hose securely and test drain cycle
Technician Only Inspect and service drain pump assembly
- Disconnect power and water supply
- Remove front panel to access drain pump
- Check pump impeller for blockages or damage
- Test pump motor operation electrically
- Replace pump if impeller is seized or motor fails
- Reassemble and test full drain cycle
Parts needed: Drain pump, Pump impeller, Drain hose if damaged
- Water remains after clearing filter and hose
- Unusual noises continue after basic cleaning
- Pump assembly replacement required
Next step
Choose the next step for E06
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Siemens 00167580 |
| voltage_rating | 230V AC |
Common Questions
What does E06 error mean on Siemens Washing Machine?
E06 error indicates a malfunction in the drain pump, preventing normal drainage.
Can I fix Siemens Washing Machine E06 error myself?
Yes, you can check and clean the drain filter and inspect the drain hose for kinks or blockages.
How much does it cost to fix E06 error?
The estimated repair cost ranges from $80 to $250, depending on parts and labor.
When should I call a technician for E06?
Call a technician if water remains after clearing the filter and hose or if unusual noises persist.
Sources & References
- Siemens error code E06 / F06 explanation (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!