Siemens Washing Machine Error E34

⚡ Quick Answer: The Siemens Washing Machine E34 error indicates a door issue, preventing the wash program from starting. This can occur if the door is not properly cl... ✅ DIY Fixable

What Does Error E34 Mean?

The Siemens Washing Machine E34 error indicates a door issue, preventing the wash program from starting. This can occur if the door is not properly closed, or if there is a fault with the door lock mechanism. Users may experience the program aborting immediately after starting, and the door may not lock securely. Inspect the door and its lock for any obstructions or damage to resolve the issue.

Common Symptoms:

  • Error E34 displayed and wash program does not start
  • Door not locking or not detected as locked
  • Program aborts immediately after start

Possible Causes

  • Door not closed properly (high)
  • Obstruction between door and housing (e.g., clothing or foreign objects) (medium)
  • Faulty door lock or latch mechanism (medium)
  • Wiring/connectivity issue to door lock sensor (low)

How to Fix Error E34

DIY Fix Check and Reseat Door

  1. Turn off and unplug the washing machine.
  2. Ensure the door is fully closed until an audible click is heard.
  3. Inspect the door seal and gap for trapped clothes or debris.
  4. Remove any obstructions and try restarting the wash cycle.

DIY Fix Inspect Door Lock and Seal for Visible Damage

  1. Visually inspect the door lock latch and rubber gasket for wear or damage.
  2. Clean any dirt or residues that might interfere with latching.
  3. If the door feels loose or does not latch with reasonable force, note this for technician diagnosis.

Technician Only Test and Replace Door Lock Assembly

  1. Disconnect machine from power supply.
  2. Access the door lock mechanism and test the lock sensor continuity.
  3. Replace the door lock/latch assembly if faulty.
  4. Verify proper function after reassembly.

Parts needed: Door lock/latch assembly, Associated fasteners

Technician Only Inspect Wiring to Door Lock and Control Board

  1. Disconnect power and open access panels.
  2. Check wiring harness and connectors between door lock and control board for damage/corrosion.
  3. Repair or replace damaged wiring/connectors.
  4. Test machine operation after repairs.

Parts needed: Wiring harness, Connectors

🛑 When to Call a Pro:
  • Error persists after checking/cleaning door and removing obstructions
  • Door lock latch feels damaged or does not engage
  • Unusual noises or visible damage when trying to close the door

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number Siemens 00145034
voltage_rating 230V AC

Common Questions

What does E34 error mean on Siemens Washing Machine?

E34 indicates a door issue, preventing the wash cycle from starting due to improper closure or a lock fault.

Can I fix Siemens Washing Machine E34 error myself?

Yes, check the door closure, reseat it, and inspect the lock for damage.

How much does it cost to fix E34 error?

The estimated repair cost for the E34 error ranges from 50 to 150 USD, including parts and labor.

When should I call a technician for E34?

Call a technician if the error persists after checking the door or if the lock feels damaged.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!