Siemens Washing Machine Error E29

⚡ Quick Answer: The Siemens Washing Machine E29 error indicates a malfunction related to the water inlet system. This issue typically arises when the machine fails to... ✅ DIY Fixable

What Does Error E29 Mean?

The Siemens Washing Machine E29 error indicates a malfunction related to the water inlet system. This issue typically arises when the machine fails to fill with water, leading to operational interruptions. Common causes include blocked inlet filters, kinked hoses, or a faulty water inlet valve. Users may notice unusual sounds or a failure to start the wash cycle when this error occurs.

Common Symptoms:

  • Machine does not fill with sufficient water to start or continue wash cycle
  • Error displayed at start or when filling water

Possible Causes

  • Blocked water inlet filters or hoses (high)
  • Kinked or improperly installed inlet hose (medium)
  • Faulty water inlet valve (electrovanne) or related component (medium)

How to Fix Error E29

DIY Fix Basic water supply checks

  1. Ensure the water tap is fully open
  2. Check the inlet hose for kinks and straighten if necessary
  3. Disconnect inlet hose and inspect water filter screens; clean any debris
  4. Perform a bucket test at the tap to verify adequate water pressure (10 L/min guideline)

DIY Fix Inspect and clean inlet components

  1. Unplug the washing machine from power
  2. Remove inlet hose from machine and tap
  3. Clean strainers at both ends of the hose with a small brush
  4. Reattach hose securely and test machine
  5. If equipped, check Aquastop filter per manufacturer instructions

Technician Only Test and replace water inlet valve

  1. Disconnect power and water supply
  2. Remove access panel to reach inlet valve
  3. Using a multimeter, test coil resistance for proper specification
  4. Replace valve if defective or coils are open
  5. Reassemble and test machine

Parts needed: Water inlet valve

Technician Only Inspect advanced components (flow meter, pressure sensor)

  1. Test flow meter and pressure switch circuits for proper operation
  2. Check internal hoses for blockages
  3. Replace any faulty sensors or components as needed
  4. Verify proper operation after repairs

Parts needed: Flow meter, Pressure sensor/pressostat

🛑 When to Call a Pro:
  • After basic user checks if E29 persists
  • If internal component testing reveals electrical faults
  • If water inlet valve replacement does not resolve the issue

Technical Specifications

wattage 2000W
component Motor Control Unit
resistance 10-30 ohms
part_number Siemens 00167420
voltage_rating 230V AC

Common Questions

What does E29 error mean on Siemens Washing Machine?

E29 indicates a malfunction in the water inlet system, causing insufficient water supply to the machine.

Can I fix Siemens Washing Machine E29 error myself?

Yes, check the water supply, inspect hoses for kinks, and clean inlet filters to potentially resolve the issue.

How much does it cost to fix E29 error?

Estimated repair costs for the E29 error range from $50 to $150 for parts.

When should I call a technician for E29?

Call a technician if basic checks do not resolve E29 or if electrical faults are detected.

Sources & References

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!