Siemens Washing Machine Error E25
⚡ Quick Answer: The Siemens Washing Machine error E25 signifies a malfunction with the turbidity sensor, which is responsible for detecting water clarity. This error ... ✅ DIY Fixable
What Does Error E25 Mean?
The Siemens Washing Machine error E25 signifies a malfunction with the turbidity sensor, which is responsible for detecting water clarity. This error typically appears shortly after initiating a wash cycle and may lead to unusual noises and a failure to drain water properly. If the error persists, it indicates an issue that requires inspection and potential replacement of the turbidity sensor.
Common Symptoms:
- Error code E25 appears on display shortly after starting a wash cycle
- Wash cycle stops or does not proceed normally
- Possible inability to complete water sensor checks
Possible Causes
- Faulty turbidity sensor (high)
How to Fix Error E25
DIY Fix Basic checks before contacting service
- Turn the washing machine off and unplug it from the power outlet.
- Wait a few minutes and plug the machine back in to see if the error resets.
- Ensure the machine’s detergent drawer and drum are not overloaded, as excessive suds can sometimes trigger sensor anomalies.
Technician Only Inspect and replace turbidity sensor
- Access the machine’s internal turbidity sensor according to the service manual.
- Test the sensor’s electrical output and response characteristics.
- Clean the sensor area if accessible to remove any residue, then re‑test.
- Replace the turbidity sensor if the fault persists.
- Verify proper functionality by running a diagnostic wash cycle.
Parts needed: Turbidity sensor (optical sensor assembly), Associated wiring/connectors
- If E25 persists after basic reset attempts
- If machine repeatedly stops mid‑cycle with the same code
- If any internal sensor testing shows out‑of‑range results
Next step
Choose the next step for E25
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Siemens 00145112 |
| voltage_rating | 230V AC |
Common Questions
What does E25 error mean on Siemens Washing Machine?
E25 indicates a turbidity sensor malfunction, causing wash cycles to stop and improper drainage.
Can I fix Siemens Washing Machine E25 error myself?
Yes, try resetting the machine and checking for overload in the detergent drawer and drum.
How much does it cost to fix E25 error?
Repair costs for E25 error range from ¥8,000 to ¥20,000 JPY, depending on region and model.
When should I call a technician for E25?
Call a technician if the E25 error persists after resets or if the machine stops mid-cycle with the same error.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!