Siemens Washing Machine Error E16
⚡ Quick Answer: The Siemens Washing Machine E16 error indicates a door lock issue, preventing the washer from starting due to the door not being securely closed. This... ✅ DIY Fixable
What Does Error E16 Mean?
The Siemens Washing Machine E16 error indicates a door lock issue, preventing the washer from starting due to the door not being securely closed. This may arise from laundry obstructing the door or a malfunction in the door lock mechanism. Users may notice the washer refusing to start the cycle or the error appearing shortly after closing the door, even if it seems closed. To resolve this, ensure the door is fully closed and free from obstructions before attempting to restart the machine.
Common Symptoms:
- Washer refuses to start the cycle
- Error displayed immediately or shortly after closing door
- Door appears closed but door lock sensor not triggered
Possible Causes
- Door not fully closed / clothing trapped (high)
- Faulty or malfunctioning door lock/locking mechanism (medium)
How to Fix Error E16
DIY Fix Check and properly close the door
- Ensure nothing is caught between door and frame
- Open the door fully and close it again firmly until it clicks
- Try starting a wash cycle again
DIY Fix Inspect door area for obstructions
- Look into the door seal and latch area for small items (coins, cloth parts)
- Remove any obstructions gently
- Re‑close door and attempt restart
Technician Only Test and replace door lock assembly
- Disconnect power and remove front panel to access the door lock module
- Test lock switch continuity with a multimeter
- Replace door lock/interlock assembly if defective
- Reassemble and test machine
Parts needed: Door lock/interlock assembly
- Error persists after door checks and cleaning
- Door lock assembly replacement unsuccessful
- Signs of internal electrical damage or burning smell
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 20W |
|---|---|
| component | Water Inlet Valve |
| resistance | 2-5 ohms |
| part_number | Siemens 00611892 |
| voltage_rating | 220V AC |
Common Questions
What does E16 error mean on Siemens Washing Machine?
E16 indicates a door lock problem, preventing the washer from starting due to the door not being securely closed.
Can I fix Siemens Washing Machine E16 error myself?
Yes, check if the door is fully closed and free of obstructions, then try restarting the cycle.
How much does it cost to fix E16 error?
The estimated cost to fix the E16 error ranges from $30 to $150 for parts and labor.
When should I call a technician for E16?
Call a technician if the error persists after checking the door or if there are signs of electrical damage.
Sources & References
- Siemens UK Support – Washing machine error E16 (official)
- Siemens Home Appliances Error Codes Guide (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!