Siemens Washing Machine Error E15

⚡ Quick Answer: The Siemens Washing Machine error E15 indicates a water leak detected in the base of the machine, triggering the internal water protection system. Thi... ✅ DIY Fixable

What Does Error E15 Mean?

The Siemens Washing Machine error E15 indicates a water leak detected in the base of the machine, triggering the internal water protection system. This fault is usually accompanied by a continuous beeping sound and a flashing display. The machine may stop functioning or fail to start until the issue is resolved, often resulting in repeated draining attempts due to water accumulation in the base pan.

Common Symptoms:

  • Error E15 displayed on the control panel
  • Wash cycle stops or won’t start
  • Machine may not proceed until issue resolved
  • Possible constant or repeated draining attempts

Possible Causes

  • Water leakage into the base pan triggering the safety float switch (medium)
  • Leak from pump housing or seals leading to water accumulation under the machine (medium)

How to Fix Error E15

DIY Fix Power off and inspect base for water

  1. Unplug the washing machine from mains power.
  2. Carefully tilt or access the bottom of the machine (if accessible) to check for water in the base pan.
  3. If water is present, absorb or remove it with towels.
  4. Let the machine dry thoroughly before powering on.

DIY Fix Check for external leaks

  1. Inspect water inlet hoses for cracks, loose connections, or kinks.
  2. Check drain hose connections and seals.
  3. Ensure door gasket and seal are intact without tears.

Technician Only Investigate internal leak sources and repair

  1. Remove access panels to inspect pump housing and seals for leakage.
  2. Check condition of internal hoses and clamps for wear or failure.
  3. Test and, if necessary, replace the safety float switch or water sensor assembly.
  4. Verify and reseal any leaking components.

Parts needed: Pump housing seal, Internal hoses/clamps, Float switch / water protection sensor

🛑 When to Call a Pro:
  • If water is collecting repeatedly after drying but the root cause cannot be identified
  • If internal components show signs of damage or complex disassembly is required
  • If the safety float switch or water sensor replacement appears necessary

Technical Specifications

wattage 100W
component Water Inlet Valve
resistance 3-5 ohms
part_number Siemens 00657280
voltage_rating 230V AC

Common Questions

What does E15 error mean on Siemens Washing Machine?

E15 error indicates a water leak detected in the base, activating the safety float switch.

Can I fix Siemens Washing Machine E15 error myself?

Yes, you can inspect the base for water, check hoses for leaks, and ensure seals are intact.

How much does it cost to fix E15 error?

Repair costs range from €50 to €200 for parts, plus labor.

When should I call a technician for E15?

Call a technician if the issue recurs after drying or if internal damage is suspected.

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!