Siemens Washing Machine Error E13

⚡ Quick Answer: The Siemens Washing Machine E13 error indicates an issue with the water inlet valve, often accompanied by a malfunction in the door lock or interlock ... ✅ DIY Fixable

What Does Error E13 Mean?

The Siemens Washing Machine E13 error indicates an issue with the water inlet valve, often accompanied by a malfunction in the door lock or interlock mechanism. This error can cause the machine to stop mid-cycle, keep the door locked, or lead to drainage issues. To resolve this, check the door for obstructions and inspect the drainage components. If the problem persists, further investigation into the door lock assembly and internal electrical circuits may be necessary.

Common Symptoms:

  • Machine stops mid/after cycle with E13 displayed
  • Door remains locked or cannot unlock
  • Sometimes drain-related symptoms reported (water not draining)

Possible Causes

  • Door lock/interlock mechanism failure or fault (medium)
  • Electrical fault affecting lock release (e.g., heating circuit leak interaction) (medium)
  • Drainage system fault (pump/filter/hose) as reported by independent repair guides (low)

How to Fix Error E13

DIY Fix Check and reset basic functions

  1. Turn off and unplug the machine
  2. Wait several minutes and restart to see if code clears
  3. Ensure laundry is not obstructing the door

DIY Fix Inspect and clear drain components

  1. Locate and clean drain pump filter
  2. Check drain hose for kinks/blockages
  3. Run a short drain/spin cycle to see if error persists

Technician Only Inspect and service door lock/interlock assembly

  1. Disconnect appliance from power
  2. Access door lock/interlock assembly
  3. Test lock operation and continuity
  4. Replace faulty lock/interlock module if needed

Parts needed: Door lock/interlock assembly, Associated wiring/connectors

Technician Only Check internal electrical circuits affecting lock release

  1. Disconnect power before opening cabinet
  2. Inspect wiring around drying/heating circuits and lock wiring
  3. Use multimeter to check for leakage or short circuits
  4. Isolate or repair any faulty wiring or components

Parts needed: Wiring harnesses, Thermal sensors/heating elements (if involved)

🛑 When to Call a Pro:
  • If door cannot be opened after unplugging and waiting
  • If water is pooling under the machine or major leaks suspected
  • If you are not comfortable accessing internal components

Technical Specifications

wattage 50W
component Water Inlet Valve
resistance 2-4 ohms
part_number Siemens 00619805
voltage_rating 230V AC

Common Questions

What does E13 error mean on Siemens Washing Machine?

E13 indicates a water inlet valve issue, often linked to door lock malfunctions.

Can I fix Siemens Washing Machine E13 error myself?

Yes, you can check for obstructions, reset the machine, and inspect drainage components.

How much does it cost to fix E13 error?

Estimated repair costs range from $80 to $200 depending on parts and labor.

When should I call a technician for E13?

Call a technician if the door remains locked after unplugging or if there are signs of major leaks.

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!