Siemens Washing Machine Error E12

⚡ Quick Answer: The Siemens Washing Machine E12 error code indicates a drainage issue that prevents the machine from draining water properly. This can lead to the was... ✅ DIY Fixable

What Does Error E12 Mean?

The Siemens Washing Machine E12 error code indicates a drainage issue that prevents the machine from draining water properly. This can lead to the washing machine stopping mid-cycle, with the drum failing to rotate or the program not proceeding as intended. Common causes include motor carbon brush wear or water level and drainage system faults. Regular maintenance and checks can help address these issues effectively.

Common Symptoms:

  • Washing machine stops mid‑cycle with E12 displayed (reported in community repair cases)
  • Drum does not rotate or machine fails to proceed with program (community reports)
  • In some reports, issues during spin or heating/time out mentioned in broader repair guides not Siemens official

Possible Causes

  • Motor carbon brush wear (motor drive issue) (medium)
  • Water/drain related fault (poor drainage or water level issue) (medium)

How to Fix Error E12

DIY Fix Basic checks for drainage and water supply

  1. Ensure the washing machine is unplugged before any checks.
  2. Check that the drain hose is not kinked, blocked or clogged.
  3. Inspect and clean the pump filter (user manual guidance).
  4. Verify adequate water supply and that inlet hoses are not blocked or bent.

Technician Only Inspect and service motor and drainage components

  1. Check the motor assembly and carbon brushes for wear and replace if worn.
  2. Test the drain pump and pressure/water level sensors for proper operation.
  3. Measure heater and sensor function if water level or heating faults suspected.

Parts needed: Motor carbon brushes, Drain pump assembly, Water level/pressure switch or sensor

🛑 When to Call a Pro:
  • If the E12 code persists after basic user‑level checks.
  • If you find water leaking, unusual burning smells, or motor noises.
  • If you are not comfortable performing internal inspections.

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number Siemens 00619982
voltage_rating 230V AC

Common Questions

What does E12 error mean on Siemens Washing Machine?

E12 error indicates a drainage problem, causing the machine to stop mid-cycle or the drum to fail to rotate.

Can I fix Siemens Washing Machine E12 error myself?

Yes, check for kinks in the drain hose and clean the pump filter after unplugging the machine.

How much does it cost to fix E12 error?

Repair costs range from ¥5,000 to ¥25,000+, depending on the required parts and region.

When should I call a technician for E12?

Call a technician if the error persists after basic checks or if you notice leaks or burning smells.

Data last verified: 2026-01-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!